Rasak Restoration.

Norman McCormick · 18th September 2008, 10:04 PM

Hi Ward,
I am not able to pull the hammer back at all, it appears to be jammed or stuck.
My Regards,
Norman.

ward · 18th September 2008, 10:41 PM

ok in pic use see where it shows number 1 can you push this piece up and does it disingauge from sear?. if it does soak the piece with penetrating oil pull the striker to a open position if it will move and smack the hammer with a rubber hammer or a screwdriver handlle that is rubber . see if there is movement. If you can not get it to move you are going to have to unscrew things and I can pretty much promise you that those screws will break into pieces.

18th September 2008, 10:41 PM	#2
ward Member Join Date: Feb 2006 Posts: 637	ok in pic use see where it shows number 1 can you push this piece up and does it disingauge from sear?. if it does soak the piece with penetrating oil pull the striker to a open position if it will move and smack the hammer with a rubber hammer or a screwdriver handlle that is rubber . see if there is movement. If you can not get it to move you are going to have to unscrew things and I can pretty much promise you that those screws will break into pieces. Attached Images

18th September 2008, 10:04 PM	#1
Norman McCormick Member Join Date: Oct 2007 Posts: 1,645	Hi Ward, I am not able to pull the hammer back at all, it appears to be jammed or stuck. My Regards, Norman.