New bought Pedang for comment and opinions.

[Sajen]

Hello David,

I agree nearly with everything Kai has stated. It's a pedang most probably from Lombok. The fittings are like Kai stated from mamas but I guess that the handle fittings are all from mamas and from the same age since the engraved flowers are very similar.
The blade isn't overcleaned IMVHO but can need further polish before you try an etch. When you don't want to use a chemical etch try to etch it with instant coffee, with a little luck it will work. It's a very nice blade!

Attached are my own pedang collection from Lombok, only the second one from up is a pedang from Sumatra. The two in down and the third from up have as well fittings from mamas, the others have silver fittings at the handles.

Regards,
Detlef

[Sajen]

And here an interesting thread regarding staining a pedang: http://www.vikingsword.com/vb/showth...ghlight=pedang

[kai]

Hello Detlef,

I agree nearly with everything Kai has stated. It's a pedang most probably from Lombok. The fittings are like Kai stated from mamas but I guess that the handle fittings are all from mamas and from the same age since the engraved flowers are very similar.

Yes, that's the lower quality I was referring to; only the basal third (the broadened part next to the blade) might be older (if the material is actually different).

The blade isn't overcleaned IMVHO but can need further polish before you try an etch. When you don't want to use a chemical etch try to etch it with instant coffee, with a little luck it will work. It's a very nice blade!

This or tannic acid might be worth a try; phosphoric acid might also work to bring laminations out. If nice pamor/laminations are showing up, only etching with arsenic will bring them out as needed from a traditional point of view.

Attached are my own pedang collection from Lombok, only the second one from up is a pedang from Sumatra. The two in down and the third from up have as well fittings from mamas, the others have silver fittings at the handles.

I actually wasn't referring to the common pedang (or kelewang according to Djelenga) which is basically single-edged.


This is actually another type of blade that is based on the typical straight, double-edged cundrik blade - just curved and usually a bit longer...

Here are 3 more examples of this specific pattern/type.

Regards,
Kai

[Sajen]

Originally Posted by kai

Yes, that's the lower quality I was referring to; only the basal third (the broadened part next to the blade) might be older (if the material is actually different).

Yep, I understand you wrong, sorry! But I still think that all is original since the fittings on the scabbard are also from mamas.

Originally Posted by kai

This or tannic acid might be worth a try; phosphoric acid might also work to bring laminations out. If nice pamor/laminations are showing up, only etching with arsenic will bring them out as needed from a traditional point of view.

Jep, agree with you. But since David won't use strong chemicals, instant coffee would be an alternative to show the pattern. But I would recommend further polish.

Originally Posted by kai

I actually wasn't referring to the common pedang (or kelewang according to Djelenga) which is basically single-edged.


This is actually another type of blade that is based on the typical straight, double-edged cundrik blade - just curved and usually a bit longer...

Here are 3 more examples of this specific pattern/type.

Yes, you are correct, you should have a X-ray vision, all shown examples are single edged. I've shown them regarding mamas/silver fittings.

Best,
Detlef