Untouched Cabasset

Kmaddock · 23rd March 2021, 09:19 PM

Lovely Item, well done.
I would leave as is personally.

I can and do repair items http://www.vikingsword.com/vb/showthread.php?t=26784 but for this I would see no point as I would not want to take it back to original shape with the brass fittings etc. I would be able to give it a good go but it will never be right and your eye will always be drawn to the repair.

Even to oil would not help in my mind as it is stable and oil would not serve any real purpose.

Leaving items a month before doing anything is one of my rules, fools rush in (me being the fool on many an occasion in my past, before i learned a bit of patience)

Keep well,

Ken

AHorsa · 24th March 2021, 09:45 AM

Hi Ken,

thanks for your comment. Only think I take into account is to replace the brass buttons (reversible). The traces of wear I wouldn´t touch. Concerning the oil I guess you are right - as long as it is stored in a dry environment, nothing will happen I guess.
Is this also true for the delamination?

Very nice work you show in the linked thread!

Quote:

Originally Posted by Kmaddock

Leaving items a month before doing anything is one of my rules, fools rush in (me being the fool on many an occasion in my past, before i learned a bit of patience)

Yes, I guess that is a lessons that most of us collectors had to learn in the beginning of their career

Cheerio
Andreas

fernando · 24th March 2021, 03:19 PM

May i doubt that an item made of plain iron stays stable, out of rust; you should see how fast rust atacks in humid environments ... like in mine, for one. Besides, i guess, oiling a piece gives it a less dull look ... and does no harm, i'd say.
I agree that giving this cabasset an original look by adding back countless components might be senseless but, recreating a sole detail like a PLUME HOLDER would give it back some grace

.
... And you may of course take month to reach for decision ... right Ken ?

.

AHorsa · 24th March 2021, 04:24 PM

I disagree

I think replacing the brass fittings (and of course the plum holder

) would give it back its original countenance. And in case that the amount of replacements disturbs, they can be removed without a trace. But that of course is subjective (and a lot of work).

If I oil it, is there any risk that the oil undermines the delaminated areas an increase delamination?

What do you think how to date the helmet? It was found in Bavaria - would this fit its origin?

Cheers
Andreas

Update: I just found the copy of a book page in Fernando´s thread #7 here: http://www.vikingsword.com/vb/showth...light=cabasset Looking at this I think mine corresponds No 9 which is dated 1st half 16th century. Can it really be so early?

fernando · 24th March 2021, 05:07 PM

Quote:

Originally Posted by AHorsa

... Update: I just found the copy of a book page in Fernando´s thread #7 here: http://www.vikingsword.com/vb/showth...light=cabasset Looking at this I think mine corresponds No 9 which is dated 1st half 16th century. Can it really be so early?

Yes Andreas, most certainly

.

adrian · 24th March 2021, 08:38 PM

If I oil it, is there any risk that the oil undermines the delaminated areas an increase delamination?

The best treatment is to wax it with a microcrystalline wax such as museums use for metals, wood & other textiles. A common brand is called 'Renaissance Wax'. It has the consistency of a paste & a little goes a long way.

fernando · 24th March 2021, 09:22 PM

Yes, British RENAISSANCE WAX seems to be one of solutions. Funny thing, i bought a 200 ml unit of it quite a few years ago but i didn't go along with how it spreads and the aspect it leaves on blades. Probably only my problem; i left it for museum folks, though.

Dmitry · 27th March 2021, 05:00 PM

Quote:

Originally Posted by Kmaddock

Lovely Item, well done.
I would leave as is personally.

I can and do repair items http://www.vikingsword.com/vb/showthread.php?t=26784 but for this I would see no point as I would not want to take it back to original shape with the brass fittings etc. I would be able to give it a good go but it will never be right and your eye will always be drawn to the repair.

Even to oil would not help in my mind as it is stable and oil would not serve any real purpose.

Leaving items a month before doing anything is one of my rules, fools rush in (me being the fool on many an occasion in my past, before i learned a bit of patience)

Keep well,

Ken

This post should be made a sticky. Best advice ever.
i wouldn't touch a thing about this helmet. Adding rivets, etc. to this piece would only make its appearance much less honest.
If, however, an urge to fix something antique is too strong, go wash your wife's car or paint a fence in your yard. That usually takes care of my 'restoration' urges.

24th March 2021, 04:24 PM	#4
AHorsa Member Join Date: May 2014 Location: Rhineland Posts: 375	I disagree I think replacing the brass fittings (and of course the plum holder ) would give it back its original countenance. And in case that the amount of replacements disturbs, they can be removed without a trace. But that of course is subjective (and a lot of work). If I oil it, is there any risk that the oil undermines the delaminated areas an increase delamination? What do you think how to date the helmet? It was found in Bavaria - would this fit its origin? Cheers Andreas Update: I just found the copy of a book page in Fernando´s thread #7 here: http://www.vikingsword.com/vb/showth...light=cabasset Looking at this I think mine corresponds No 9 which is dated 1st half 16th century. Can it really be so early? Last edited by AHorsa; 24th March 2021 at 04:52 PM.

23rd March 2021, 09:19 PM	#1
Kmaddock Member Join Date: May 2014 Location: Ireland Posts: 543	Lovely Item, well done. I would leave as is personally. I can and do repair items http://www.vikingsword.com/vb/showthread.php?t=26784 but for this I would see no point as I would not want to take it back to original shape with the brass fittings etc. I would be able to give it a good go but it will never be right and your eye will always be drawn to the repair. Even to oil would not help in my mind as it is stable and oil would not serve any real purpose. Leaving items a month before doing anything is one of my rules, fools rush in (me being the fool on many an occasion in my past, before i learned a bit of patience) Keep well, Ken

24th March 2021, 03:19 PM	#3
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	May i doubt that an item made of plain iron stays stable, out of rust; you should see how fast rust atacks in humid environments ... like in mine, for one. Besides, i guess, oiling a piece gives it a less dull look ... and does no harm, i'd say. I agree that giving this cabasset an original look by adding back countless components might be senseless but, recreating a sole detail like a PLUME HOLDER would give it back some grace . ... And you may of course take month to reach for decision ... right Ken ? .

24th March 2021, 08:38 PM	#6
adrian Member Join Date: Mar 2012 Posts: 132	If I oil it, is there any risk that the oil undermines the delaminated areas an increase delamination? The best treatment is to wax it with a microcrystalline wax such as museums use for metals, wood & other textiles. A common brand is called 'Renaissance Wax'. It has the consistency of a paste & a little goes a long way.

24th March 2021, 09:22 PM	#7
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Yes, British RENAISSANCE WAX seems to be one of solutions. Funny thing, i bought a 200 ml unit of it quite a few years ago but i didn't go along with how it spreads and the aspect it leaves on blades. Probably only my problem; i left it for museum folks, though.