Backplate cuirass

[cel7]

Originally Posted by ulfberth

for what I can see on these pictures its an original !
Please thake some sanding paper and scrub the inside on several flat surfaces and post these pictures here , I think you will be surprized.

Thanks Ulfberth for your answer! I have used some scotch brite instead. Not sure what to look for but here are some pictures.

[ulfberth]

Please rub here and here and this time do use sanding paper .

[cel7]

Here they are

[ulfberth]

still did not use sandpaper did yah , well now you cleaned away the evidence.
If you had used sand paper only the surface would be cleaned and the black would be way better visible showing hammer strokes.

[cel7]

Originally Posted by ulfberth

still did not use sandpaper did yah , well now you cleaned away the evidence.
If you had used sand paper only the surface would be cleaned and the black would be way better visible showing hammer strokes.

Actually I did use sandpaper. I'm afraid there are no hammer strokes. Or I rubbed it to hard...

[ulfberth]

here the are , is used your last picture

[cel7]

Originally Posted by ulfberth

here the are , is used your last picture

Thank you for the drawing! They are hard to spot but there are indeed some irregulareties.