Firangi

[fernando]

Jim, indeed the sickle/eyelash symbol is not necessarliy Genoese. In fact, and observing (as quoted) Boccia & Coelho's work, we notice that the largest number of those pictured are Venetian (or Veneto); only one from Beluno and another from Genova. But far from such little 'inconsistence', how would we compare rustic marks made in massive trade blades with those perfectly engraved in fine weapons signed by master smiths; unless we judge them as counterfeits ... and hardly rely on them as being their true geographic origin.


.

[Jim McDougall]

As mentioned in the original post, and with the nice example of Indian basket hilt sword, there has been a notable absence of Indian swords of late. With that it seems terminology and classification debates always ensue, with the term FIRANGI being one of the key topics.

In this case, we have focused on the blade markings, which resemble the well known 'sickle' (eyelash, hogs back etc.) type which occur often on blades from numerous sources. As I previously mentioned, early writers typically regarded these as having originated in Genoa, while they actually occurred on blades from other North Italian centers as well, and collectively used variations. There were examples which had the name GENOA actually bracketed by the sickle marks, further fueling the classification as Genoan.

In "Armi Bianch Italiene" (Boccia & Coelho), this most important reference is basically a catalogue which presents many weapon examples from various sources and holdings. As noted, many of the examples' markings are variations of the 'sickle' type, and indeed from Venice...without consulting my copy, I believe there were other locations shown with such marks as well.

Mostly, the 'Genoan' attribution I would consider a generally held notion derived from the case of these Genoan ports and stations being the source of many trade blades, which often bore these type markings.

In time artificers in other locations began spuriously copying these marks, most often the dentated arcs typically seen with three dots at each end of the arcs. In East Europe, these often bracketed the FRINGIA term; and these often are seen in variation on Styrian swords, with Solingen also using them to bracket terms such as ANDREA FERARA.

Having noted all of this, and returning to the topic of the classification 'firangi' and assessment of examples in order to warrant such classification, here we are viewing the markings on this blade as one means of doing this.

It is difficult at best to assess a sword blade to determine whether it is European or a native made example by photos, but the excellent entry by Lee using the metallurgic approach is one viable means.

As suggested, with the preponderance of markings on blades, especially trade blades, there is a degree of fallibility in using these as a determining factor for the geographic origin of blade manufacture. However, making observations on the character of a marking offers some insights based on the method of application and execution, content and positioning of such marks.

In many cases of spurious markings, they are often detected as such by superfluous or incongruent other markings which accompany them. The German use of famed Spanish markings accompanied by other marks which would never have been paired, as well as misspellings etc. is one case in point.

I just wanted to add this perspective with regard to methods used in which to assess 'firangi' blade. In one closing point I must remind that the term 'firangi' is just that, a term denoting in general 'foreign' (blade) and used mostly in collectors parlance. It is not a sword 'type' but more accurately describes a swords 'condition' (that is with foreign blade). Though technically it CAN be applied to many sword types (Indian, with foreign blades), it is typically limited to the Hindu basket hilt form.

[ariel]

Jim,
I understand your points, but having handled a lot of Indian blades I am virtually certain that the blade is European.
I do not think I have seen such wide and shallow Fuller on Indian blades and the general appearance of the steel, its sheen, are distinctly not Indian. Together with markings it supports the European origin. And, yes, we cannot pinpoint the origin of the blade other than a general feeling of North Italy.

[Jim McDougall]

Originally Posted by ariel

Jim,
I understand your points, but having handled a lot of Indian blades I am virtually certain that the blade is European.
I do not think I have seen such wide and shallow Fuller on Indian blades and the general appearance of the steel, its sheen, are distinctly not Indian. Together with markings it supports the European origin. And, yes, we cannot pinpoint the origin of the blade other than a general feeling of North Italy.

I am really glad my points are understood, from my opinion in post #12 indicating I thought the blade was European (North Italian) as well as my subsequent posts supporting that. I am unclear on where I am to have suggested the blade was Indian.

[ariel]

Jim,
I have interpreted your saying “It is difficult at best to assess a sword blade to determine whether it is European or a native made example by photo” as such. Obviously, it was my mistake. Glad we are in agreement.

[fernando]

... As apparently we are not betraying our first assessments. A sword with an Indian hilt and a foreign (Italian for the case) blade; a setup named by many as Firangi. This might not be the most academic definition, but sure is the most known by the common collector; maybe even by the locals.
... Authors not being an exception, like Tirri, for one .


.

[Jim McDougall]

Originally Posted by ariel

Jim,
I have interpreted your saying “It is difficult at best to assess a sword blade to determine whether it is European or a native made example by photo” as such. Obviously, it was my mistake. Glad we are in agreement.

Thank you Ariel, I think sometimes (often) my explanations become a bit too detailed, so often misunderstanding my wording is often quite understandable. Ironically, what I was trying to say is that your 'firangi' was VERY much so, and a most handsome and excellent example of the 'form'........a Hindu basket hilt, holding a distinctly European blade.

My comments in assessing the blades by photo meant to point out that the key elements used to ascertain European origin cannot be expected to be achieved unequivocably in these cases. This is because hands on examination can more closely determine the application and character of markings, as well as the flaws and metallurgical elements, weight, spring and demeanor of the blade. Too often being cautious in declaring an opinion as such can be misperceived accordingly.

As noted previously, the 'firangi' term is not by any means a clear definition of a sword 'type', but a qualifying description most commonly used in collectors parlance to describe a 'Hindu basket hilt' form sword carrying as European or 'foreign' blade. It has in cases been attempted to be applied to other forms with such blades, but in my view unsuccessfully.

Here I would agree that the 'firangi' term is indeed used in many references toward describing these Indian swords, as it has become such a standard in collectors parlance. The book by the late Anthony Tirri being mentioned, I would note was as well known not 'academic' by the standards of the larger scholarship of arms literature, but as I have always asserted, it was a great reference guide for the categories of arms typically encountered in the collecting community. The point is that terms need not be 'academically' correct if they are broadly and collectively known in a certain descriptive sense and commonly used as such.

While probably not a collectively used term in local vernacular, I am sure that in degree, the firangi term has found use in many of the diverse languages and regions in India. This would of course account for its place in the literature on Indian arms which led to its more stringent use by collectors as described.

[fernando]

An inteligent explanation in context, Jim ... as usual .

As an aside ...
The power of language is like that; the repetitive calling a thing with a determined name by the common man, ends up becoming effective. When i was in school, the teacher told me that Jesus, pretending to cover the largest audience with his parables, spoke to the crowd in Aramic; which i took as the period "lingua franca".
Looks like Stone fell to the same sin .

Good "nite" ... dearest cowboy .

.