My polearm collection for your amusement

[CSinTX]

Nice collection! Artillery shells can work for display but careful, they get tippy. Wouldn't want them to fall and poleaxe the cat.

[fernando]

Originally Posted by CSinTX

... Artillery shells can work for display but careful, they get tippy. Wouldn't want them to fall and poleaxe the cat.

Says i, with three of them around the house. For safety, besides placing the shells against corners, i glue a larger square of acrylic under their base.

.

[BUCC_Guy]

My new lighting and gallery hanging system is nearly finished.

I used plumbing pipe hangers, threaded rod, and an aluminum rail. I can move each holder around whenever I want, and the pipe hangers are hinged for swapping things out.

I can’t believe it cost me $4000 to put it together. Glad it is almost done.

[CSinTX]

I like it! I assume the lighting was most of the cost? Have you considered placing the copper and brass pieces outside to allow them to age some? Maybe there is an accelerated chemical aging process that would work?

[kronckew]

Originally Posted by CSinTX

I like it! I assume the lighting was most of the cost? Have you considered placing the copper and brass pieces outside to allow them to age some? Maybe there is an accelerated chemical aging process that would work?

Egg yolk is good for tarnishing copper and silver alloys. It's naturally high in sulphur compounds.

"Liver of Sulphur" works even faster & has a nice pleasant aroma your family will love, and it lingers for your future enjoyment. Just a few drops diluted in your wife's favourite sauce pan will endear you to her forever. get the gel version, it lasts longer, the powder version goes off in a few hours exposed to air. If your family is of the rare ones that find the aroma not to their liking, you may want to use it outdoors.

[Fernando K]

Hello

I always wonder if any of the tridents were used to cut the reins of the enemy rider. There is a model of Spanish spear that has blades to cut reins.

Affectionately

[BUCC_Guy]

Originally Posted by CSinTX

I like it! I assume the lighting was most of the cost? Have you considered placing the copper and brass pieces outside to allow them to age some? Maybe there is an accelerated chemical aging process that would work?

Lights, $2k materials, install/drywall/paint $1.5k, the remainder was various materials and shipping for the hanging system.

I thought the copper electroplated hangers would look better than white, black, or silver. They are cast iron with plating, so I don’t think I could patinate them. I can always paint them, though.

I’ve got some smaller diameter hangers on the way for the thinner poles. The largest axe head on the cleaver-like voulge likes to swing out and greet you at the door.

I engineered this system myself with materials available, so I know it doesn’t look as clean as a museum setup. More importantly, though, is that it’s removable and adjustable. I could pack it up and move it to a new home if needed.

When finished with hangers at both levels and appropriately sized, nothing should move or be... floppy.

My main reason for bumping the thread and sharing is that the system may only be a 5 out of 10 on aesthetics, but function is like a 9. If I had fewer weapons, I could twist the bottom hangers at an angle, push them together, and do a fan effect like we see at most US museums.

Edit: As you can see from my earlier picture, the lighting system was badly needed! I’ve been talking about doing it for 7 years. I finally did it.