The EARLY MAKERS TRADE MARKS thread... lost and partly restored.

fernando · 18th October 2017, 07:12 PM

Old 16th December 2007, 03:55 PM

Posted by:
fernando
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal

Hi Jeff,

Originally Posted by Jeff D
Thanks to this excellent thread I think I see a trend. The "anchors" seem to be associated with Spanish blades and the Orb and crosses "Reich Apples" with Solingen? Any observations for, or against this trend? (Quote)

Jeff

A trend yes, but maybe not an exclusive situation. I guess these trade symbols had a condition to be copied or even adopted by other Peoples, who later developed their own evolutions and modifications. I am thinking of the example shown in post #50, where the cross over the orb was a typical Portuguese Chivalry Order. We also know that there are cases where something that was adopted from another culture, place or people became so popularized by the "copier/adopter" that, for the public conscience, such thing was their own creation.
Fernando
.

fernando · 18th October 2017, 07:12 PM

Old 16th December 2007, 04:09 PM

Posted by:
fernando
Lead Moderator European Armoury

Join Date: Dec 2004
Location: Portugal

Hi Jim,

Originally Posted by Jim McDougall
Arent many swords marked IHN SOLINGEN? Is MENE or MINI a place somewhere? (Quote)

I am no more than a mere ignorant, but i have a deep conviction that these terms refer something spiritual/cabalistic/religious, in no way a place, a factory, or the like.
The hipothesis of being some symbolic situation relative to be numbered, as per Daniel's profecies, would not be yet finally outruled. Probably the explanation, not being precisely this, will be its neighbour.
I keep trying to find out, within my modest possibilities.
Fernando
.

fernando · 18th October 2017, 07:12 PM

Old 16th December 2007, 04:10 PM

Postd by:
Rick
Member

Join Date: Nov 2004

Shear Steel
Thanks for the welcome Jim !

From another site :

" Shear Steel - Before the development of Crucible Steel, Blister Steel was forged by repeated folding and forge welding to mix the areas of high and low carbon steel. Shear Steel was the lowest quality generally created and further folding and welding created Double Shear Steel. Long regarded as ideal for blades and cutting edges, primarily because the slag trapped within the steel lead to a serrated edge without it being purposely formed. "

I say this about the blade because there are some curious areas on one side that look as if they have eroded/rusted in layers .
.

fernando · 18th October 2017, 07:13 PM

Old 16th December 2007, 04:35 PM

Posted by:
fernando
Lead Moderator European Armoury

Join Date: Dec 2004
Location: Portugal

Hi Jim,

Originally Posted by Jim McDougall
The same problems occur with marks, as on the lance head. It does not seem these are 'S's but possibly some stylized symbol. They are too 'loose' to be the letter and look like snakes, though not suggesting this is the case yet. They are triangulated, apparantly emphasizing three as we have noted in other cases.
I have seen these curious squiggle type marks in motif on the entire blade of Spanish colonial sword blades, and if I am not mistaken, they have been seen on SE Asian weapons. Unfortunately I cannot cite that with certainty, and perhaps if anyone from those factions happens to read this they could probably add some information.
Since lances are not regularly in my field of study, could you say where these might have originated.
Jim (Quote)

Thank you for the new perspectives on the marking of the lance, which i will seriously consider. This piece was bought by my seller to the keeper of an old country farm ( mannor ) house, in an area full of old nobility estates. The lady quoted the lance as being from the "house defences". The hunting lance is not marked and therefore off topic, but i can add is also Portuguese.
Fernando
.

fernando · 18th October 2017, 07:13 PM

Old 17th December 2007, 03:22 AM

Posted by:
Jim McDougall
EAA Research Consultant

Join Date: Dec 2004
Location: Route 66

Rick, thank you for explaining that on shear steel, a term I have heard but did not really understand. I wish I had an answer to return on the marking on the Moroccan sa'if, but as I say, though I have seen similar I have no distinct name to offer..yet. We never stop looking! There are possibilities in the references I have mentioned, and whoever gets to them will hopefully find some clues.
We have made some good progress on some of the other frequently seen markings on ethnographic weapons with European blades, and as always, the research continues.

Fernando, I'm still with you on the strong possibility of cabalistic origins in many of these markings, so we'll keep looking. I think there is key symbolism in the three sequence of the 'S's on the lance too. In an interesting aside, reading on pirate flags (prompted by the discovery of the ship that had been the notorious Captain Kidd's) I found that the skull and crossbones was not as prominantly used as typically represented, and that one pirate captain used the symbol repeated 'three' times. Symbolism, found even with these scoundrels of the sea it seems.
.

fernando · 18th October 2017, 07:14 PM

Posted by:
Jim McDougall
EAA Research Consultant

Join Date: Dec 2004
Location: Route 66

Hi Fernando,
Just reviewing some inscriptions on rapier blades and one had the Solingen example I.H.N. Solingen

This seems to suggest an acronym or primary letters of some other phrase or wording in the punctuation.

Another German blade 17th c. PETER WUNDES IHN SOLINGEN
While this seems to read by this maker 'in' Solingen, in German grammar the 'ihn' goes not mean 'in'.

Another Italian rapier c.1650 IHN. SOLINGEN punctuated between

Another Italian c.1620 I.H.N. entirely by itself suggesting obviously by the punctuation between the letters that they may be primary letters of a phrase or wording rather than a word itself.

* Solingen blades noting that as a 'place' of manufacture often have variations of ME FECIT SOLINGEN (Solingen made me)

Another note on the triple repitition :
An Italian rapier c.1650 NE.NE.NE
What could this mean? but the three emphasis is clear!

While on another Italian rapier of the same period:
A.S.H.S. repeated many times
again this seems primary letters of words in a phrase, emphasized
by repitition as if to multiply the power of the phrase.

I think these examples are good support for your theory Fernando! But I still haven't come up with 'MENE' yet, but could this also be used in acronym form as in these other examples? rather than a single word.

The research continues

All the best,
Jim
.

fernando · 18th October 2017, 07:14 PM

Old 18th December 2007, 11:49 AM

Posted by:
E.B. Erickson
Member

Join Date: Dec 2007

Hey all,
A few weeks ago Jim asked me to add my two cent's worth to this thread, so here goes. I've read the posts to this point, and can offer some thoughts on several of the marks discussed. Please bear in mind that the comments are my opinions only, but where possible I'll provide some sort of reference.

First, I think that some of the anchor marks being discussed aren't anchors at all, but are crosses with some decorative touches to the base and with added crossbars. Many of these marks appear on Spanish blades, which was (is?) a predominantly Catholic country, so it isn't surprising to see crosses at the end of fullers. The differences in the designs may be due to smiths having a distinctive cross as an identifying mark (and a blade may or may not have the smith's name in the fuller). Other differences may be because there have been a lot of variations on the Christian cross over the years, and the crosses at the end of fullers can reflect local/smith preferences.

Solingen apparently used actual anchors as a mark (or some of it's smiths did), and these don't look much like the marks referred to in the paragraph above. In Neumann's "Swords and Blades of the American Revolution" there's a photo of a brass-hilted English cav. sword with S-shaped members to the basket, and the blade bears an anchor mark. I have in my collection an English sword of the late 1700s with a German blade, and the blade is etched in the fuller "Ihn Solingen" and at the end of the fuller is a nicely etched nautical anchor (but not a fouled anchor like one sees on naval swords).

On IHN SOLINGEN, I think the IHN really does mean "in". Remember that spelling back then was very phonetic, and there wasn't much in the way of standardization. Punch marks between letters may just be embellishment.

On MINI/MENE. One often sees this as INIMINI (what I want to know is, where is minymoe? --bad joke), and there was a suggestion on an old SFI thread that this may be an abbreviated form of the Latin IN TE DOMINI. Unfortunately, the thread is going to be about impossible to find, because it was one of those "What is this sword" threads. The sword happened to be English ca. 1700 with INIMINI in the blade's fullers.

And then there's Eastern blades with their own versions of European maker's marks. These can be tough to tell apart! For example, see eBay 190183023239, which ended a day or two ago. Euro or Eastern?

Oh well,that's enough for now! --ElJay
.

18th October 2017, 07:12 PM	#1
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Old 16th December 2007, 03:55 PM Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Hi Jeff, Originally Posted by Jeff D Thanks to this excellent thread I think I see a trend. The "anchors" seem to be associated with Spanish blades and the Orb and crosses "Reich Apples" with Solingen? Any observations for, or against this trend? (Quote) Jeff A trend yes, but maybe not an exclusive situation. I guess these trade symbols had a condition to be copied or even adopted by other Peoples, who later developed their own evolutions and modifications. I am thinking of the example shown in post #50, where the cross over the orb was a typical Portuguese Chivalry Order. We also know that there are cases where something that was adopted from another culture, place or people became so popularized by the "copier/adopter" that, for the public conscience, such thing was their own creation. Fernando . Last edited by fernando; 20th October 2017 at 11:32 AM.

18th October 2017, 07:12 PM	#2
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Old 16th December 2007, 04:09 PM Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Hi Jim, Originally Posted by Jim McDougall Arent many swords marked IHN SOLINGEN? Is MENE or MINI a place somewhere? (Quote) I am no more than a mere ignorant, but i have a deep conviction that these terms refer something spiritual/cabalistic/religious, in no way a place, a factory, or the like. The hipothesis of being some symbolic situation relative to be numbered, as per Daniel's profecies, would not be yet finally outruled. Probably the explanation, not being precisely this, will be its neighbour. I keep trying to find out, within my modest possibilities. Fernando . Last edited by fernando; 20th October 2017 at 11:33 AM.

18th October 2017, 07:12 PM	#3
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Old 16th December 2007, 04:10 PM Postd by: Rick Member Join Date: Nov 2004 Shear Steel Thanks for the welcome Jim ! From another site : " Shear Steel - Before the development of Crucible Steel, Blister Steel was forged by repeated folding and forge welding to mix the areas of high and low carbon steel. Shear Steel was the lowest quality generally created and further folding and welding created Double Shear Steel. Long regarded as ideal for blades and cutting edges, primarily because the slag trapped within the steel lead to a serrated edge without it being purposely formed. " I say this about the blade because there are some curious areas on one side that look as if they have eroded/rusted in layers . . Last edited by fernando; 20th October 2017 at 11:34 AM.

18th October 2017, 07:13 PM	#4
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Old 16th December 2007, 04:35 PM Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Hi Jim, Originally Posted by Jim McDougall The same problems occur with marks, as on the lance head. It does not seem these are 'S's but possibly some stylized symbol. They are too 'loose' to be the letter and look like snakes, though not suggesting this is the case yet. They are triangulated, apparantly emphasizing three as we have noted in other cases. I have seen these curious squiggle type marks in motif on the entire blade of Spanish colonial sword blades, and if I am not mistaken, they have been seen on SE Asian weapons. Unfortunately I cannot cite that with certainty, and perhaps if anyone from those factions happens to read this they could probably add some information. Since lances are not regularly in my field of study, could you say where these might have originated. Jim (Quote) Thank you for the new perspectives on the marking of the lance, which i will seriously consider. This piece was bought by my seller to the keeper of an old country farm ( mannor ) house, in an area full of old nobility estates. The lady quoted the lance as being from the "house defences". The hunting lance is not marked and therefore off topic, but i can add is also Portuguese. Fernando . Last edited by fernando; 20th October 2017 at 11:36 AM.

18th October 2017, 07:14 PM	#6
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Hi Fernando, Just reviewing some inscriptions on rapier blades and one had the Solingen example I.H.N. Solingen This seems to suggest an acronym or primary letters of some other phrase or wording in the punctuation. Another German blade 17th c. PETER WUNDES IHN SOLINGEN While this seems to read by this maker 'in' Solingen, in German grammar the 'ihn' goes not mean 'in'. Another Italian rapier c.1650 IHN. SOLINGEN punctuated between Another Italian c.1620 I.H.N. entirely by itself suggesting obviously by the punctuation between the letters that they may be primary letters of a phrase or wording rather than a word itself. * Solingen blades noting that as a 'place' of manufacture often have variations of ME FECIT SOLINGEN (Solingen made me) Another note on the triple repitition : An Italian rapier c.1650 NE.NE.NE What could this mean? but the three emphasis is clear! While on another Italian rapier of the same period: A.S.H.S. repeated many times again this seems primary letters of words in a phrase, emphasized by repitition as if to multiply the power of the phrase. I think these examples are good support for your theory Fernando! But I still haven't come up with 'MENE' yet, but could this also be used in acronym form as in these other examples? rather than a single word. The research continues All the best, Jim . Last edited by fernando; 20th October 2017 at 11:38 AM.