![]() |
|
![]() |
#1 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,339
|
![]()
Putting all symbolism aside :
As a thrusting weapon I'd imagine that a keris luk (wavy) would do more damage to your innards than a straight blade ; might make a larger entrance wound too ; but the point (no pun intended Jose ![]() The perception that the kris of the Moros in its waved form is more demanding for effective use seems prevalent ; but that does not tell us whether if used properly the wound was more devastating or not . A wavy kris has a longer edge than a straight one and is used differently than the Keris of Jawa . With the huge European Zwiehanders the waves might make parrying a pike thrust a little easier . |
![]() |
![]() |
![]() |
#2 | |
Member
Join Date: Dec 2004
Location: 2008-2010 Bali, 1998-2008 USA
Posts: 271
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jul 2005
Location: Toronto, Canada
Posts: 1,242
|
![]()
Hello Radu, hello all,
Wouldn't wavy blades be more effective at draw cuts than straight blades? Much like the falx and all those sickle weapons, the pulling/cutting motion would pull the convex blade deeper into the object being cut, no? For beasts like the zweihander draw-cuts may not be feasible but how about the smaller blades? IMO the waves of these large flamberge swords were more aesthetic - the symbol of Archangel Michael's flaming sword in battle would be an awesome sight- than functional. Is the parying advantage of the wavy blades that important, or is it negligible? Regards, Manolo |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Dec 2004
Location: 2008-2010 Bali, 1998-2008 USA
Posts: 271
|
![]()
CONCLUSION - ITS MORE FOR THE ESTHETICS ! Unless any groundbreaking info, its a closed chapter !
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Dec 2004
Posts: 221
|
![]()
I'm not sure you can throw every blade with a wave in the same category as a "fashion or esthetic statement". The Moro kris "swords" with or without waves were both effective combat weapon, maybe more a matter of form and fighting preference.
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Dec 2004
Location: 2008-2010 Bali, 1998-2008 USA
Posts: 271
|
![]()
Mabagani, with all respect to the traditional or spiritual, does a waved blade inflict a deeper cut, a longer cut or presents any advantages other than visual over the classic cutting edge?
I find elements like weight, shape, curvature, length, sharpness, material type to make a crucial difference but a waved edge does not seem to change eficacity. The most honest working waved blades I see it in the Moro Keris and the Landesknecht which seem to not loose their capacity of combat eficiency but those like some African or Hindo-Persian weapons have nothing but to loose by keeping the blade shape in cause and so far I am convinced its nothing but a matter of esthetics, likely the case with absolutelly all of them. In the case of the Moro (Tausug) blades is there any action or effect waved ones can inflict and the others cannot ? Waved blades have nothing in common with saw or serrated blades in case anyone tries to open that up... |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Dec 2004
Posts: 221
|
![]()
Setting aside tradition and spiritual aspects, etc., and looking at it from the point of combat, when the Moro kris is in its scabbard in most cases one wouldn't really know whether or not its straight, wavy, wavy straight, saber, etc. only a general idea of the length and what you'd expect looking at the opponent. Once the sword is drawn and it is a wavy kris, the things to watch out for are the cuts which need to enter flesh and bones at a certain angles to cause the most damage, the krismen are going for a kill or to inflict the most damage with every shot, cutting or thrusting, with this in mind the matter of asthetics and fashion in or out of the scabbard are moot points. btw The cutting action of a wavy kris is kind of like cutting wood, flesh and bone at an angle with the grain but the perpendicular bouncing drag shot could have been advantageous against multiple opponents and in close quarters, like the kampilan, perhaps why numerous wavy kris are seen in old photos and collections. Again, its a matter of preference and custom fitting, I've seen wavy kris swords from heavy to light and long to short, each is going to have its varying degree of action and effect depending on the depth of the waves and frequency, regardless of the weapon it'd be the same intention if its a true Moro swordsman trying to severe limbs, decapitate and kill using whatever they had at the moment, so the Tausug saying goes...
Last edited by MABAGANI; 2nd February 2006 at 07:00 AM. |
![]() |
![]() |
![]() |
#8 | |
Member
Join Date: Jun 2005
Posts: 210
|
![]() Quote:
n2s |
|
![]() |
![]() |
![]() |
#9 | |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]() Quote:
![]() I guess it's a case of "If a wavy kris cuts in the forest and no one is there to see it bleed more (or less...or the same) than a straight blade does it really cut at all? ![]() It seems to me that there needs to be a whole lot more scientific experimentation before we can come to any real conclusions on this one, don't you think? ![]() |
|
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Dec 2004
Location: 2008-2010 Bali, 1998-2008 USA
Posts: 271
|
![]()
Welcome, welcome ...
![]() ![]() Its true, I cannot expect anyone to sacrifice his old weapon or worse ![]() ![]() One thing for sure, a waved blade must be a lot harder to sharpen evenly... |
![]() |
![]() |
![]() |
#11 |
Member
Join Date: Dec 2004
Location: Cincinnati, OH
Posts: 940
|
![]()
Sorry Radu, i wasn't trying to do any finger pointing. Of course i remember that you opened the thread. That's why i was wondering why you were trying to close it out so quickly. Generally that's what i assume when someone says,"...it's a closed chapter."
You are probably right, it might be a lot harder to sharpen a wavy blade evenly. But somehow the Moro know the trick because my wavy example is sharp as a razor all along it's length. ![]() Perhaps testing could be done on materials that approximate the texture and hardness of flesh. Anyone have any ideas? |
![]() |
![]() |
![]() |
#12 | |
Member
Join Date: Feb 2006
Posts: 18
|
![]() Quote:
![]() Think of that kind of damage ![]() |
|
![]() |
![]() |
![]() |
#13 | |
Member
Join Date: Feb 2006
Posts: 18
|
![]() Quote:
do to hobbie mishap "I found out the sharp way" ![]() |
|
![]() |
![]() |
![]() |
#14 |
Member
Join Date: Feb 2006
Posts: 18
|
![]()
I can say this, they look good on my wall " I get neat remarks about it", and all my buddys cant keep there fingers of it..
![]() |
![]() |
![]() |
![]() |
|
|