Silver Keris Coteng with old restoration

David · 6th October 2015, 06:01 PM

A very nice silver coteng hilt. The sheath repair is well done, but i really couldn't comment as to whether or not it was a local or European repair. Not exactly a "restoration" as missing pieces of the sheath have not been restored, but it has a nice quality look over all.
It is a shame about the missing gonjo. I personally have a hard time getting too excited about incomplete blades. You might be able to commission a replacement if the keris is an important one for you.
On luks i would count this as 11. The tip had obviously suffered some erosion to account for the confusion on your count.
I am afraid i don't understand what you mean by your comparison to Keris Pejetan. I see nothing in your blade from these photographs that looks like impressed fingertips.

Sajen · 6th October 2015, 10:34 PM

Hi Roland,

agree, it's a very interesting coteng with all the repairs, equal if done locally or later in Europe. And I agree with the others, clearly a 11 luk blade, the last curve is worn.
And a very good observation from Gustav, the blade don't need to be a Java blade, it look more like an old Palembang blade IMVHO. To bad that the gonjo is missing.

David, I think that Roland mean with the comparison to pejetan that the blade has a sinus like wave along the length, I have seen this before and think that there is name also for a blade like this.

Regards,
Detlef

A. G. Maisey · 6th October 2015, 11:24 PM

In respect of blade origin:- I can see nothing in this blade that would militate against a Javanese origin. True, the sogokan are a little longer than usual for Jawa, but I have seen innumerable examples of variation from the norm in Javanese blades, and Balinese also, for that matter, not only in sogokan, but in all possible ways. Personally, I'd be happy to accept this as Javanese until it could be shown to be other than that.

Gustav · 7th October 2015, 12:10 AM

That what is left of the Ricikan details is insufficient for me to speculate about the orgin of this blade. Yet - if blades from Malay Peninsula do have Sogokan, it tend to be long.

Roland_M · 7th October 2015, 09:53 PM

Thanks for all the comments. Detlef (sajen) explained very well what I tried to say with "curved in z-direction".

There are 11 luk, thanks.

I investigated the blade with a microscope and it is very deeply corroded but the tip itself seems to have its original length. Hard to judge.
I will leave the blade as it is, it is too late for a repolishing.

My guess about the European restoration is because I believe, a silversmith in Indonesia knows how a Keris Coteng must look. Whatever, it is a felicitous restoration in my eyes.

Roland

David · 8th October 2015, 12:16 AM

Quote:

Originally Posted by Roland_M

I investigated the blade with a microscope and it is very deeply corroded but the tip itself seems to have its original length. Hard to judge.
I will leave the blade as it is, it is too late for a repolishing.

My guess about the European restoration is because I believe, a silversmith in Indonesia knows how a Keris Coteng must look. Whatever, it is a felicitous restoration in my eyes.

Roland, if, as most seem to agree, this blade originated in Jawa it would not be correct to re-polish it anyway. Balinese blades were often polished after cleaning, but it is not the norm for keris in general.
The sheath here was obviously damaged and is missing parts of the original wood. I don't believe that an Indonesian silversmith would have been capable of making a repair that returned this sheath to its original and intended shape as a coteng sheath. So i'm not convinced that is evidence of where this repair was actually done. It could still be Indonesian work as easily as European IMO. In most cases, if the owner of this keris had the money, a new sheath would have been commissioned. It this case it would seem they did not.

Gustav · 8th October 2015, 08:03 AM

As I wrote, because of the state of the blade in question I am not able to say, where this blade has been made. I have named almost only one still readable Ricikan feature, and this feature, together with dress, allow to think of Malay Peninsula as one of possible origin places of this blade.

Now I would like to hear some equally valid arguments for Java as origin of it, as, I quote, most of us seem to agree, this blade was originated in Java.

Roland_M · 8th October 2015, 11:59 AM

"In most cases, if the owner of this keris had the money, a new sheath would have been commissioned. It this case it would seem they did not. "

David, this makes sense.

But the quality of the silver work is on a high level, I almost think, a new sheath would be cheaper than such a silverwork.

The upper ring was lost, I gave the sheath to a jeweller and he took ~75$ for only one silver ring.

All I can say for sure is that it is a quite old restoration because of the thick black patina, the surface of the silver is full of tiny pitting.

Roland

6th October 2015, 06:01 PM	#1
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,218	A very nice silver coteng hilt. The sheath repair is well done, but i really couldn't comment as to whether or not it was a local or European repair. Not exactly a "restoration" as missing pieces of the sheath have not been restored, but it has a nice quality look over all. It is a shame about the missing gonjo. I personally have a hard time getting too excited about incomplete blades. You might be able to commission a replacement if the keris is an important one for you. On luks i would count this as 11. The tip had obviously suffered some erosion to account for the confusion on your count. I am afraid i don't understand what you mean by your comparison to Keris Pejetan. I see nothing in your blade from these photographs that looks like impressed fingertips.

6th October 2015, 10:34 PM	#2
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,214	Hi Roland, agree, it's a very interesting coteng with all the repairs, equal if done locally or later in Europe. And I agree with the others, clearly a 11 luk blade, the last curve is worn. And a very good observation from Gustav, the blade don't need to be a Java blade, it look more like an old Palembang blade IMVHO. To bad that the gonjo is missing. David, I think that Roland mean with the comparison to pejetan that the blade has a sinus like wave along the length, I have seen this before and think that there is name also for a blade like this. Regards, Detlef

6th October 2015, 11:24 PM	#3
A. G. Maisey Member Join Date: May 2006 Posts: 7,019	In respect of blade origin:- I can see nothing in this blade that would militate against a Javanese origin. True, the sogokan are a little longer than usual for Jawa, but I have seen innumerable examples of variation from the norm in Javanese blades, and Balinese also, for that matter, not only in sogokan, but in all possible ways. Personally, I'd be happy to accept this as Javanese until it could be shown to be other than that.

7th October 2015, 12:10 AM	#4
Gustav Member Join Date: Jun 2009 Posts: 1,280	That what is left of the Ricikan details is insufficient for me to speculate about the orgin of this blade. Yet - if blades from Malay Peninsula do have Sogokan, it tend to be long.

7th October 2015, 09:53 PM	#5
Roland_M Member Join Date: Aug 2014 Location: Germany Posts: 525	Thanks for all the comments. Detlef (sajen) explained very well what I tried to say with "curved in z-direction". There are 11 luk, thanks. I investigated the blade with a microscope and it is very deeply corroded but the tip itself seems to have its original length. Hard to judge. I will leave the blade as it is, it is too late for a repolishing. My guess about the European restoration is because I believe, a silversmith in Indonesia knows how a Keris Coteng must look. Whatever, it is a felicitous restoration in my eyes. Roland

8th October 2015, 08:03 AM	#7
Gustav Member Join Date: Jun 2009 Posts: 1,280	As I wrote, because of the state of the blade in question I am not able to say, where this blade has been made. I have named almost only one still readable Ricikan feature, and this feature, together with dress, allow to think of Malay Peninsula as one of possible origin places of this blade. Now I would like to hear some equally valid arguments for Java as origin of it, as, I quote, most of us seem to agree, this blade was originated in Java.

8th October 2015, 11:59 AM	#8
Roland_M Member Join Date: Aug 2014 Location: Germany Posts: 525	"In most cases, if the owner of this keris had the money, a new sheath would have been commissioned. It this case it would seem they did not. " David, this makes sense. But the quality of the silver work is on a high level, I almost think, a new sheath would be cheaper than such a silverwork. The upper ring was lost, I gave the sheath to a jeweller and he took ~75$ for only one silver ring. All I can say for sure is that it is a quite old restoration because of the thick black patina, the surface of the silver is full of tiny pitting. Roland