Recently acquired Kukri, number 2

mrcjgscott · 14th September 2015, 11:27 PM

Quote:

Originally Posted by David R

As you can see it is made for a small hand, I can not get more than 3 fingers round the grip but it is no toy. The etched decoration is nice, but means there is no way I can check for a laminated blade... Could this be a faked damascus or of some other significance. I am also intrigued by the lack of suspension loop on the back and what looks to be an extra pocket behind the bi-knives.

Hello David,

Nice to see you have caught the kukri bug, I warned you they are addictive!

You kukri appears to be a very well made traditional Nepalese example, dating somewhere from the very end of the 19thC, into the first quarter of the 20thC.

There are no belt loops, as it would traditionally have been carried in the belt sash. I have attached an image to demonstrate the traditional carry.

The etched blade decoration is not commonly encountered, and certainly lifts an otherwise "standard" piece up, and was obviously added to demonstrate the owner was a "cut" above!

Is it etched on both sides?

Repair work on old scabbards is common, especially on these older pieces. It is very easy to cut through the inside edge of the scabbard when drawing the blade if one is not used to handling a kukri.

I look forward to seeing your other piece too!

Kind regards,

Chris

PS How did you find the Birmingham fair? There were three big fairs on that day, I am sure the organisers do it on purpose out of rivalry, but it only hurts the dealers, and the collectors, who cannot be in three places at once!

David R · 14th September 2015, 11:46 PM

Hiya, and thanks to you both for the feedback. Nice to be told I have an old one..... The blade is etched on both sides and despite the short grip, handles nicely. The ferule fits so tightly and blends so well with the blade that at first I thought it a bolster forged in one with the blade.
Regarding the Fair, it was much as usual though with a handful of empty tables and not as crowded as often is. The less crowded venue meant I spotted stuff I think I would have missed otherwise, ie this particular blade, and an original Indian bullet mould that I will post later.

mrcjgscott · 15th September 2015, 12:59 AM

Hello David,

It is certainly a well made piece, and the good quality etching and the carving of the grip ring are signs of its quality.

Here are a couple of old pictures of an etched piece I own, for comparison. Mine is a appears to be patterns of "eyes" which may have had some religious or spiritual meaning.

All the best,

Chris

15th September 2015, 12:59 AM	#3
mrcjgscott Member Join Date: Mar 2011 Posts: 189	Hello David, It is certainly a well made piece, and the good quality etching and the carving of the grip ring are signs of its quality. Here are a couple of old pictures of an etched piece I own, for comparison. Mine is a appears to be patterns of "eyes" which may have had some religious or spiritual meaning. All the best, Chris Attached Images

14th September 2015, 11:46 PM	#2
David R Member Join Date: Jan 2011 Posts: 1,123	Hiya, and thanks to you both for the feedback. Nice to be told I have an old one..... The blade is etched on both sides and despite the short grip, handles nicely. The ferule fits so tightly and blends so well with the blade that at first I thought it a bolster forged in one with the blade. Regarding the Fair, it was much as usual though with a handful of empty tables and not as crowded as often is. The less crowded venue meant I spotted stuff I think I would have missed otherwise, ie this particular blade, and an original Indian bullet mould that I will post later.