Hand made sword, wondering about origin

Sajen · 1st August 2015, 10:25 PM

Luzon is a good guess, I've seen many similar ones from there but most of the time the hilts have been from horn.

Rick · 1st August 2015, 10:46 PM

Since this is listed in two forums :

I'm not entirely convinced this is Philippine; any more back story on this piece Ken ?
Purchased in Ireland ?
I can't recall seeing a Philippine sword with a guard constructed the way this one is; usually they are one sheet/piece of metal .
This one is not .
The cross section of the blade is different from Philippine ones of this type also (if I'm understanding your description of it correctly) .

Ken Maddock · 2nd August 2015, 08:33 PM

Hi
I was away for a few days sorry about the delay in reply.
There is no further story
I bought it off a guy who regularly gives me a call and i am always surprised by the great items he turns up, i got a full inventory of IRA grenades and ammunition loading equipment from the 1920's off him and it was fasinating.
Simple story was that it was built into the dry stone wall of a house being renovated in rural ireland, house was v old, and that is all i know
I can take any pictures required
Hard to describe blade so i will put up a few pictures tomorrow when i get a chance to take some pictures
I googled Philippine Luzon sword and I see where you are coming from in the similarities, it is a fairily generic shape alright, hopefully images of the blade cross section may help more in the identification
Regards and thank you all for your interest and comments

Ken

Jim McDougall · 2nd August 2015, 10:36 PM

Hi Ken,
While certainly not likely to apply here, by analogy, sometimes strangely incongruent items turn up in odd contexts. One example some time back was a broadsword which turned up in Ontario, Canada, and unbelievably was taken for a sword from the crusades, or of the period at least. This led to the quite expected business of possible early visitation from Europe, Vikings and all sorts of speculation.
Naturally, as reason prevailed, research revealed the sword was a Sudanese kaskara, brought back from those campaigns by a British soldier who had moved to Canada shortly thereafter.

Then there was the case of the photo of a Sioux Chief in 1880s with a Japanese katana hanging on the wall behind him!

These oddities are many, and make for truly interesting investigation and great stories!

Each weapon has its own, and is unique for it!

All the best,
Jim

Ken Maddock · 3rd August 2015, 10:32 AM

Hi
Please find attached more images of blade
A good bit of de lamination or miss forging which I hope you can see
Also I hope you can see how it is completely flat on one side
shaping down to sharp edge only on one side with central spine in middle
I will do a sketch if you think it might help
Regards
Ken

Ian · 3rd August 2015, 04:39 PM

Ken:

Your blade reminds me of another Spanish colonial sword that I posted several years ago here http://www.vikingsword.com/vb/showthread.php?t=2068 and before that here: http://www.vikingsword.com/ubb/Forum1/HTML/001235.html.

That sword had a typical Spanish D-guard with a tang peened over the end of the guard. It's Spanish origin was confirmed by an inscription, Recuerdo Republicano, at forte. The blade of that sword was also flat on one side and peaked on the other to create a triangular cross sectional profile. I think we concluded that it was probably from the Philippines, but perhaps Mexico or elsewhere in the former Spanish colonies where independence from Spain had been sought.

Why a Spanish colonial sword would end up in the wall of an old Irish house is an intriguing question. One could probably write an interesting novel about that! I'm a fan of historical fiction.

Ian.

Rick · 3rd August 2015, 04:52 PM

Completely flat on one side . That's where I had questions about origin . One flat side would argue more for a Philippine origin . Still, a strange place for something Philippine to show up .

Of course, we can't discount the possibility it belonged to one of Gracie O'Malley's crew .

2nd August 2015, 08:33 PM	#3
Ken Maddock Member Join Date: Aug 2013 Location: Ireland Posts: 104	Hi I was away for a few days sorry about the delay in reply. There is no further story I bought it off a guy who regularly gives me a call and i am always surprised by the great items he turns up, i got a full inventory of IRA grenades and ammunition loading equipment from the 1920's off him and it was fasinating. Simple story was that it was built into the dry stone wall of a house being renovated in rural ireland, house was v old, and that is all i know I can take any pictures required Hard to describe blade so i will put up a few pictures tomorrow when i get a chance to take some pictures I googled Philippine Luzon sword and I see where you are coming from in the similarities, it is a fairily generic shape alright, hopefully images of the blade cross section may help more in the identification Regards and thank you all for your interest and comments Ken Last edited by Ken Maddock; 2nd August 2015 at 08:57 PM.

3rd August 2015, 10:32 AM	#5
Ken Maddock Member Join Date: Aug 2013 Location: Ireland Posts: 104	Hi Please find attached more images of blade A good bit of de lamination or miss forging which I hope you can see Also I hope you can see how it is completely flat on one side shaping down to sharp edge only on one side with central spine in middle I will do a sketch if you think it might help Regards Ken Attached Images

3rd August 2015, 04:39 PM	#6
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,399	Ken: Your blade reminds me of another Spanish colonial sword that I posted several years ago here http://www.vikingsword.com/vb/showthread.php?t=2068 and before that here: http://www.vikingsword.com/ubb/Forum1/HTML/001235.html. That sword had a typical Spanish D-guard with a tang peened over the end of the guard. It's Spanish origin was confirmed by an inscription, Recuerdo Republicano, at forte. The blade of that sword was also flat on one side and peaked on the other to create a triangular cross sectional profile. I think we concluded that it was probably from the Philippines, but perhaps Mexico or elsewhere in the former Spanish colonies where independence from Spain had been sought. Why a Spanish colonial sword would end up in the wall of an old Irish house is an intriguing question. One could probably write an interesting novel about that! I'm a fan of historical fiction. Ian. Last edited by Ian; 3rd August 2015 at 04:49 PM.

1st August 2015, 10:25 PM	#1
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,215	Luzon is a good guess, I've seen many similar ones from there but most of the time the hilts have been from horn.

1st August 2015, 10:46 PM	#2
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,339	Since this is listed in two forums : I'm not entirely convinced this is Philippine; any more back story on this piece Ken ? Purchased in Ireland ? I can't recall seeing a Philippine sword with a guard constructed the way this one is; usually they are one sheet/piece of metal . This one is not . The cross section of the blade is different from Philippine ones of this type also (if I'm understanding your description of it correctly) .

2nd August 2015, 10:36 PM	#4
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 10,297	Hi Ken, While certainly not likely to apply here, by analogy, sometimes strangely incongruent items turn up in odd contexts. One example some time back was a broadsword which turned up in Ontario, Canada, and unbelievably was taken for a sword from the crusades, or of the period at least. This led to the quite expected business of possible early visitation from Europe, Vikings and all sorts of speculation. Naturally, as reason prevailed, research revealed the sword was a Sudanese kaskara, brought back from those campaigns by a British soldier who had moved to Canada shortly thereafter. Then there was the case of the photo of a Sioux Chief in 1880s with a Japanese katana hanging on the wall behind him! These oddities are many, and make for truly interesting investigation and great stories! Each weapon has its own, and is unique for it! All the best, Jim

3rd August 2015, 04:52 PM	#7
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,339	Completely flat on one side . That's where I had questions about origin . One flat side would argue more for a Philippine origin . Still, a strange place for something Philippine to show up . Of course, we can't discount the possibility it belonged to one of Gracie O'Malley's crew .