Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Ethnographic Weapons
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 30th January 2014, 06:19 PM   #1
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

The Royal Khanjar.

Designer Sherazad in circa 1850. The later finer intricate work inspired after about 1970... and could be called the modern design. This dagger however is a very meaty example and heavily ornate about the hilt which is all covered in silver and known here as "Tams". This is a huge 7 Ringer. The entire scabbard arrangement influenced by the Muscat Khanjar and integrated by the designer with a hilt of largely Indian form/decorative style.
Regards,
Ibrahiim al Balooshi.
Attached Images
      

Last edited by Ibrahiim al Balooshi; 31st January 2014 at 09:34 AM.
Ibrahiim al Balooshi is offline   Reply With Quote
Old 21st February 2014, 03:29 PM   #2
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

Salaams all; Note to Library;

Brought from Rostaq; This khanjar is of good quality though for some reason the black Rhino hilt is not considered comparable to the clear Rhino... The Khanjar sports a tight pattern of Baatinah style below the belt and has excellent design in silver pin form on the hilt with a full silver back. The blade is good with a dull thudding resonance and smells like sweaty socks and herbs !! A good sign. The belt is fine being silver stitched on leather and no expense is spared on its quality buttons and buckles.

Regards,
Ibrahiim al Balooshi.
Attached Images
      
Ibrahiim al Balooshi is offline   Reply With Quote
Old 12th March 2014, 10:35 AM   #3
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

Ibrahiim al Balooshi is offline   Reply With Quote
Old 16th April 2014, 03:31 PM   #4
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

A couple of designs just encountered ~ I particularly liked the parallel line silver decoration ..The Khanjar with gilded buttons has been reworked...as many Khanjars have these days...and to include some gold pins. The dagger with the black leather scabbard is from Salalah and closely related to a Yemeni style already discussed on these pages.

Comments welcome folks !!

Ibrahiim al Balooshi.
Attached Images
      

Last edited by Ibrahiim al Balooshi; 16th April 2014 at 03:40 PM. Reason: art
Ibrahiim al Balooshi is offline   Reply With Quote
Old 9th May 2014, 02:49 PM   #5
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

Salaams All... An example of a reworked Rhino Horn Hilt on a newer Khanjar ...Another Baatinah style with the owner residing in Rostaq . I think the use of gilded buttons and spot gold wash is very attractive. The back of the hilt is pure silver platework often seen on expensive hilts. The blade is slightly loose and out of kilter....It's wonky.

Regards,
Ibrahiim al Balooshi.
Attached Images
   

Last edited by Ibrahiim al Balooshi; 10th May 2014 at 09:41 AM.
Ibrahiim al Balooshi is offline   Reply With Quote
Old 14th May 2014, 04:26 PM   #6
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

For a broad background into Khanjars of Oman etc see http://www.klm-mra.be/icomam/downloads/issue07.pdf
Ibrahiim al Balooshi is offline   Reply With Quote
Old 23rd May 2014, 05:13 PM   #7
Ibrahiim al Balooshi
Member
 
Ibrahiim al Balooshi's Avatar
 
Join Date: Jul 2006
Location: Buraimi Oman, on the border with the UAE
Posts: 4,408
Default

Some of the styles of hilt using carbon or nylon material are very good(called generally "Americky" here))... Here is a hilt with all the pins and looking like wood grain ..etc...They don't break when dropped and are easy to work on....and reasonably priced.
Attached Images
  

Last edited by Ibrahiim al Balooshi; 23rd May 2014 at 05:24 PM.
Ibrahiim al Balooshi is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.