Tulwar with pronounced Yelman.

Norman McCormick · 30th June 2012, 08:53 PM

Hi Jens,
To get back on track here are a few photos of the scarf weld on the blade. There is approx 3 inches separating the V welds on either side of the blade and at the sharp edge there is a very thin crack probably only becoming noticeable to the smith when the blade was sharpened The photos are of one side of the blade only. Thanks again.
My Regards,
Norman.

Jens Nordlunde · 30th June 2012, 11:03 PM

Thanks Norman,
Whatever you call the blade, it is a nice old one

.
Jens

Norman McCormick · 5th July 2012, 05:31 PM

Hi Ibrahiim,
Thank-you for your continued interest, it is gratifying that we are all learning post by post. It is appreciated.
My Regards,
Norman

eric45 · 10th July 2012, 04:54 AM

Nice sword.

30th June 2012, 08:53 PM	#1
Norman McCormick Member Join Date: Oct 2007 Posts: 1,646	Hi Jens, To get back on track here are a few photos of the scarf weld on the blade. There is approx 3 inches separating the V welds on either side of the blade and at the sharp edge there is a very thin crack probably only becoming noticeable to the smith when the blade was sharpened The photos are of one side of the blade only. Thanks again. My Regards, Norman. Attached Images

30th June 2012, 11:03 PM	#2
Jens Nordlunde Member Join Date: Dec 2004 Location: Europe Posts: 2,718	Thanks Norman, Whatever you call the blade, it is a nice old one. Jens

5th July 2012, 05:31 PM	#3
Norman McCormick Member Join Date: Oct 2007 Posts: 1,646	Hi Ibrahiim, Thank-you for your continued interest, it is gratifying that we are all learning post by post. It is appreciated. My Regards, Norman

10th July 2012, 04:54 AM	#4
eric45 Member Join Date: Aug 2010 Location: usa Posts: 32	Nice sword.