Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > European Armoury
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 6th April 2012, 06:40 PM   #1
Dmitry
Member
 
Dmitry's Avatar
 
Join Date: Jul 2009
Posts: 607
Default

Again, our posts have crossed, Michael.
I once tried to remove the Ren.Wax from a blade. And I couldn't do it. I tried Acetone, a couple of commercial solvents, and still the white patches of wax wouldn't come off. Apparently it's possible to remove with special solvents, under lab conditions.

One might ask - why on Earth did you try to remove the wax?
Answer - I had put a very thin layer of it on a perfectly shiny nicely etched blade, and the sheen became dull, as the wax creeped into the miniscule pores in the metal, which were not evident to the naked eye.

Just my $.02..
Dmitry is offline   Reply With Quote
Old 6th April 2012, 06:49 PM   #2
Matchlock
(deceased)
 
Matchlock's Avatar
 
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
Default

Hi Dmitry,

This of course is the one question almost never asked: how can that wax be removed?

With the wax I used (it was mixed for me by a concervation company) I always succeeded rubbing it off with acetone. Sometimes I remember rubbing hard and trying several times, somtimes using a piece of wood soaked in acetone. To hear it does not work probably depends on the solvent originally used in your wax.

Anyway, warming the metal should get to wax our of those pittings as well.

If it does not, I suggest just ignoring it is there and applying a thick layer of olive oil above it. It should work.

Sadly I am not experienced in chemistry myself.

Best,
Michael
Matchlock is offline   Reply With Quote
Old 6th April 2012, 08:20 PM   #3
cornelistromp
Member
 
cornelistromp's Avatar
 
Join Date: Mar 2009
Posts: 1,064
Default

Quote:
Originally Posted by Dmitry
Again, our posts have crossed, Michael.
I once tried to remove the Ren.Wax from a blade. And I couldn't do it. I tried Acetone, a couple of commercial solvents, and still the white patches of wax wouldn't come off. Apparently it's possible to remove with special solvents, under lab conditions.

One might ask - why on Earth did you try to remove the wax?
Answer - I had put a very thin layer of it on a perfectly shiny nicely etched blade, and the sheen became dull, as the wax creeped into the miniscule pores in the metal, which were not evident to the naked eye.

Just my $.02..
Renaissance wax can easily be removed with white spirit.(terpetine)

best,
cornelistromp is offline   Reply With Quote
Old 6th April 2012, 08:26 PM   #4
Matchlock
(deceased)
 
Matchlock's Avatar
 
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
Default

Quote:
Originally Posted by cornelistromp
Renaissance wax can easily be removed with white spirit.(terpetine)

best,

Right, Jasper,

Provided that that was the solvent originally used I think ...

That's exactly what I was trying to refer to anyway.

Best,
Michael
Matchlock is offline   Reply With Quote
Old 8th April 2012, 10:50 AM   #5
Multumesc
Member
 
Multumesc's Avatar
 
Join Date: Feb 2012
Location: Romania
Posts: 208
Default

It may well preserved with silicone oil for weapons.
Multumesc is offline   Reply With Quote
Old 10th April 2012, 06:51 PM   #6
broadaxe
Member
 
Join Date: Nov 2008
Posts: 334
Default

Quote:
Originally Posted by Multumesc
It may well preserved with silicone oil for weapons.
Indeed. What was done in the past is not necessarily good. Olive oil is NOT a good preservative, as it contains acids and water, and it hardens to a thick film that would jamm any fine mechanism.
broadaxe is offline   Reply With Quote
Old 10th April 2012, 08:42 PM   #7
fernando
(deceased)
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
Default

Quote:
Originally Posted by broadaxe
... and it hardens to a thick film that would jamm any fine mechanism.
fernando is offline   Reply With Quote
Old 10th April 2012, 09:47 PM   #8
TimW
Member
 
TimW's Avatar
 
Join Date: Aug 2010
Posts: 54
Default

i would not use olive oil... could get rancid... i use ballistol on all my handmade knives.
TimW is offline   Reply With Quote
Old 12th April 2012, 07:01 PM   #9
broadaxe
Member
 
Join Date: Nov 2008
Posts: 334
Default

Quote:
Originally Posted by fernando
Olive oil hardens over the years, creates a thick layer that 'freezes' moving parts.
broadaxe is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.