Rusted 17th C persian shamshir within decayed scabbard

Rick · 12th September 2010, 08:15 PM

Rennaisance makes a very good de-corroder; this will work well in the pitted areas after the rust has been removed .
PM if you need a source .

Soaking in acid fruit juice, Pineapple; would remove most of the crud from the blade .
Coca Cola is a great rust remover .

The handle is a problem unto itself .
Maybe the Rennaisance de-corroder would be a good choice for the rust on the hilt .

Gavin Nugent · 12th September 2010, 09:35 PM

Congrats Manuel,

Little mess, little effort, complete item job done.

Do not dremel, you will be left with undulating surfaces, the rusted ereas will quickly be eaten out and the good steel not.
You have a tiresome process ahead. I'll be in touch.

Gav

celtan · 12th September 2010, 11:56 PM

Hi Guys,

Thanks for the pointers. I felt like a caveman for even contemplating the Dremel alternative, but the rust deposits found are dramatic.

BTW, Rick. I was researching a filipino keris on the Ethnic Weapons Forums, and chanced upon a very interesting thread on blade care. Saw the Pineaple and the Coconut juice suggestions. Very interesting! I have limitedly used tomato sauce in the past.

Will answer all pms ASAP.

Best regards, and thank you very much for your assistance.

Best regards

M

Quote:

Originally Posted by freebooter

Congrats Manuel,

Little mess, little effort, complete item job done.

Do not dremel, you will be left with undulating surfaces, the rusted ereas will quickly be eaten out and the good steel not.
You have a tiresome process ahead. I'll be in touch.

Gav

Rick · 13th September 2010, 01:21 AM

Pineapple juice is good; Coke takes rust off of anything .

You have to soak; a wallpaper tub from the paint store is a cheap and effective lengthways container about 4-6" deep .

The Rennaisance product is a gel so you can paint it on specific areas; it will not run .

ward · 16th September 2010, 05:34 PM

Interesting sword nice heavy blade probably good watering on it. Nothing about it suggests 17 cen. tho. Grips pretty rough finished tip replaced on scabbard looks like. Would say dates around 1800. hope you will post pics once you do a test etch and see what the pattern is. Popular type sword!

M ELEY · 17th September 2010, 01:57 AM

I know what I'm about to say sounds heinous, but you can use sandpaper to remove the heavy rust spots. FINE 600 GRIT paper with some olive oil. It sounds terrible, but it really works and does not damage the blade. The finest grit feels almost like a normal piece of paper, but it has just enough resistance to remove flaky rust. I would also recommend the pineapple juice soak, works wonders. Don't ever even contemplate naval jelly!!! Only good for cleaning old tools and such as it pickles the metal odd colors (Long ago, been there, done that...

)

celtan · 17th September 2010, 01:00 PM

Hi Guys,

I'll follow your counsel to the letter. Where do I get the Renaissance rust remover..? Should I begin with the pineapple juice, or will it also affect the rest of the blade..?

Best regards

Manuel

Quote:

Originally Posted by M ELEY

I know what I'm about to say sounds heinous, but you can use sandpaper to remove the heavy rust spots. FINE 600 GRIT paper with some olive oil. It sounds terrible, but it really works and does not damage the blade. The finest grit feels almost like a normal piece of paper, but it has just enough resistance to remove flaky rust. I would also recommend the pineapple juice soak, works wonders. Don't ever even contemplate naval jelly!!! Only good for cleaning old tools and such as it pickles the metal odd colors (Long ago, been there, done that...

)

12th September 2010, 09:35 PM	#2
Gavin Nugent Member Join Date: Oct 2007 Posts: 2,818	CONGRATS Congrats Manuel, Little mess, little effort, complete item job done. Do not dremel, you will be left with undulating surfaces, the rusted ereas will quickly be eaten out and the good steel not. You have a tiresome process ahead. I'll be in touch. Gav

12th September 2010, 08:15 PM	#1
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,339	Rennaisance makes a very good de-corroder; this will work well in the pitted areas after the rust has been removed . PM if you need a source . Soaking in acid fruit juice, Pineapple; would remove most of the crud from the blade . Coca Cola is a great rust remover . The handle is a problem unto itself . Maybe the Rennaisance de-corroder would be a good choice for the rust on the hilt .

13th September 2010, 01:21 AM	#4
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,339	Pineapple juice is good; Coke takes rust off of anything . You have to soak; a wallpaper tub from the paint store is a cheap and effective lengthways container about 4-6" deep . The Rennaisance product is a gel so you can paint it on specific areas; it will not run .

16th September 2010, 05:34 PM	#5
ward Member Join Date: Feb 2006 Posts: 637	Interesting sword nice heavy blade probably good watering on it. Nothing about it suggests 17 cen. tho. Grips pretty rough finished tip replaced on scabbard looks like. Would say dates around 1800. hope you will post pics once you do a test etch and see what the pattern is. Popular type sword!

17th September 2010, 01:57 AM	#6
M ELEY Member Join Date: Dec 2004 Location: NC, U.S.A. Posts: 2,159	I know what I'm about to say sounds heinous, but you can use sandpaper to remove the heavy rust spots. FINE 600 GRIT paper with some olive oil. It sounds terrible, but it really works and does not damage the blade. The finest grit feels almost like a normal piece of paper, but it has just enough resistance to remove flaky rust. I would also recommend the pineapple juice soak, works wonders. Don't ever even contemplate naval jelly!!! Only good for cleaning old tools and such as it pickles the metal odd colors (Long ago, been there, done that... )