Help on mark on Italian sword ca. 1580

[Victrix]

Great thread! As far as I’m aware the Venice arsenal marks would be either a C.X. for Consiglio dei Dieci or the Lion of St. Mark. So it seems to me that the twig mark must be an identifier of origin for the purchaser and seller alike. It might also have been something of a quality standard mark that it had passed tests by a guild. Marca a Mosca is probably a descriptive term (like “twig” mark). I think Fernando is onto something when pointing to Boccia & Coelho mentioning the mark as ferri di mulino (iron mill) marks. On German swords carrying the twig marks you might consider the possibility that these were North Italian blades with fake Solingen marks, rather than the other way around.

I wish I could find more to read on this in the English language (like Gotti’s Caino book!). You may find this of interest: https://www.hema-minsk2019.org/base_...ibition-part-3. It mentions a Beluni knot.

[Jim McDougall]

Originally Posted by Victrix

Great thread! As far as I’m aware the Venice arsenal marks would be either a C.X. for Consiglio dei Dieci or the Lion of St. Mark. So it seems to me that the twig mark must be an identifier of origin for the purchaser and seller alike. It might also have been something of a quality standard mark that it had passed tests by a guild. Marca a Mosca is probably a descriptive term (like “twig” mark). I think Fernando is onto something when pointing to Boccia & Coelho mentioning the mark as ferri di mulino (iron mill) marks. On German swords carrying the twig marks you might consider the possibility that these were North Italian blades with fake Solingen marks, rather than the other way around.

I wish I could find more to read on this in the English language (like Gotti’s Caino book!). You may find this of interest: https://www.hema-minsk2019.org/base_...ibition-part-3. It mentions a Beluni knot.

It REALLY is a great thread! and you bring forth some great points. The arsenal of the Doge at Venice is remarkable, and I do recall the CX (Council of Ten) which seems to appear on a very limited number of weapons. The winged lion of St. Mark also seems limited in occurrence, both of these are described well in Boccia & Coelho. It seems these are seen on some of the schiavona so well associated with the Doge.

Very interesting points you bring up on the 'twig' mark described as the ferri di Mulino in Boccia & Coelho, which seems not only appropriate but telling.
This reference to 'iron mill' obviously lends well to a place producing blades, and I know that I have seen this mark noted as a 'mill rind' as well. The 'rind' is of course the four armed support for the millstone, and the quadrangular nature of this mark in basis is tempting to such association.

I will note here that there are markings used in very similar capacity, which are dentated circles known as 'cog wheels' (Mann, 1962, Wallace Coll. A768).
Here we have another component of the machinery of blade producing mills used as a mark on blades.

What is puzzling is, these marks seem with basic features, but in variation distorted (some of the 'marca mosca; twig; ferri di Mulino) so much so that the numbers of them in Wallace Coll. plates look almost like Rohrschach images.

You make a very good point on the possibility of Italian blades carrying these 'twig' marks possibly reflecting German markings. In looking through Wallace Coll. it seems the propensity of these type marks in German swords is profound, so that possibility is quite plausible. There was so much diffusion of the spurious use of marks, and even movements of makers between countries that it would be difficult to make broad classifications on them. It becomes very much a matter of assessment based on merits and features of each specific weapon.

Great link and often surprising how much important historic detail is included in these kinds of references involving reproduction of classic swords.
On the Gotti book...……….wish I could find one!!! Pretty hard to find, and all there is online with this name is of course the 'Teflon don'. Sometimes pop culture overwhelms serious history.

[AndreaFeraro89]

Originally Posted by Victrix

Great thread! As far as I’m aware the Venice arsenal marks would be either a C.X. for Consiglio dei Dieci or the Lion of St. Mark. So it seems to me that the twig mark must be an identifier of origin for the purchaser and seller alike. It might also have been something of a quality standard mark that it had passed tests by a guild. Marca a Mosca is probably a descriptive term (like “twig” mark). I think Fernando is onto something when pointing to Boccia & Coelho mentioning the mark as ferri di mulino (iron mill) marks. On German swords carrying the twig marks you might consider the possibility that these were North Italian blades with fake Solingen marks, rather than the other way around.

I wish I could find more to read on this in the English language (like Gotti’s Caino book!). You may find this of interest: https://www.hema-minsk2019.org/base_...ibition-part-3. It mentions a Beluni knot.

Hi All,
my name is Giovanni Sartori, I live in Northern Italy and my main interest is to recover and to share knowledge about italian arms and armour makers.

I am the author of the article about storta for the exhibition in Minsk and I am the maker of the copy of the Caino storta shown in the article (and the video documentary, sadly avaiable only with catalogue of the exhibition).

By the way, I am here to tell you some things about marks, Andrea Feraro, Belluno and other towns related to swordmaking in Republic of Venice.

There is a lot to tell, I will start with marks but spending some words about the production area.

The "Belluno Flyes" or "Belluno Knots" (I use second term) are marks mainly used in the area that I call swordmakers "triangle".

This area develops around 3 main towns: Belluno, Feltre and Vittorio Veneto (before IWW his divided is Serravalle and Ceneda 2 little villages along the turrent Meschio).
The reasons of such a great development of swordmaking art here are mainly 3:
-the nearness with mines of Fursil and Colle Santa Lucia that provides, since roman times, a superio quality of ore. Manganese rich siderite is a ore relatively poor of iron content (around 40%) but fre from phosphor and sulphur that are the worst elements to have in the steel. On other hand manganese is an element that gives great mechanical propreties to the steel made (we can discuss later about this point)
-the nearness with 2 big rivers (Brenta and Piave), that are crucial to transport goods from production centers to Venice lagoon, where is the bigger market of renaissance Europe. Do you know Stradivari Violins? very good... same rivers where used to bring wood to make that violins from Val di Fiemme forests.
-the presence of the main "driving force" before invention of steam engine: the hydraulic power. This area is full of water and we are in the very first part of dolomitic area (alps) so become easier to use the force of the falling water.

In this area many swordmaking masters has lived and worked. In Belluno for example Andrea Feraro and his brother Zandonà has started to work at the Fisterre workshop owned by Giovanni Barcelloni (do you remember the scorpion mark on hafted weapons? http://www.vikingsword.com/vb/newrep...eply&p=244426#). Andrea has countinued to live and work in Belluno until the end of his life (no... he has not moved to Scotland or Brescia or Milan). His brother Zandonà has bought his workshop in Serravalle (Vittorio Veneto) and his descendance has contiunued to produce swords until the end of XVII century.
Another great master is Pietro da Formicano (another story to tell)

To come back to the marks...
This marks seems to appear in the second half of XV century and being used during all XVI and very first part of XVII. The real meaning of them is still unclear, many legends but nothing certain. They are not related to the Venice arsenal because arsenal mark was used in Venice where they not produce, but only store weapons and armours. The classical arsenal mark is a circle with a St.Marc Lion inside (simbol of Venice Republic). Same thing for Doge armoury (CX armoury).

CIVIDAL DE BELUN is for cetainly a rare mark (Cividal is the roman name of city, sometimes used alone to indicate Belluno). And proves in my opionion the production of big stocks of blades made by many swordmakers together.

To conclude, I have studied many years the belunese swordmakers and now I am part of a big project called KLANG.

The aim of this project is to study this lost history of our countries and to promote it. We are planning conferences, exhibitions, new studies and pubblications.

Feel free to ask me everithing you want about the argoument, I will do my best to give you an exhaustive reply

All the best
Giovanni Sartori

[fernando]

Benvenuto nel forum, Giovanni .
Great info and revelations you have posted. I am sure the members will love to read all that ... and more to come, if you will

[Jens Nordlunde]

Hello Giovanni, and welcome to the forum.
I dont collect European swords and daggers, but I do have a Firangi with a blade from Belluno.

[Victrix]

Hi Vittorio!

Welcome to the Forum and thanks for posting. Your article is excellent and really beautiful sword!

I would love to learn more about Italian swords and local manufacturing centres. It would be great if you could keep us posted on your work. It would also be very welcome if someone could translate some of the books from Italian. There should be a market for this.

Which are the best places in Italy to visit for arms and armour? Do the old manufacturing facilities still exist as museums? When I was in Milano I hoped to travel to Brescia to see the arms collection in the castle but unfortunately ran out of time. I hope to make another trip to see the Venice Arsenal and then take the train to Brescia. Is Brescia and Caino very different from the swordmakers ”triangle” which you mentioned?

All the best and mille grazie,

Victrix

[cornelistromp]

italian storta last quarter of of 16thc.

[fernando]

Outstanding example ... of both sword and marks !


-