Sunda golok variations

Sajen · 10th May 2020, 01:17 PM

Hello dear members,

I have assembled some Sunda golok in the last few years, in the past they don't have been from great interest for me.
I have to state that this are very well worked blades and I doubt that only one of the shown examples are worked for those who travel.
I will show them piece by piece with a short description.

Sajen · 10th May 2020, 01:32 PM

The possible oldest example in the collection, I would guess last quarter of the 19th century. Laminated blade, handle horn, carved as stylized makara, pierced through carved, low grade silver or mamas ferrule, scabbard two wooden slabs, two fine wooven rotan bands still present, scabbard mouth horn, foot (possible form from gobang scabbards) is missing.
58,5 cm inside scabbard, 55,8cm without, blade 42,5 cm, 9 mm thick at the base.

Sajen · 10th May 2020, 01:47 PM

Second example I would place to the first quarter of the 20th century, very well worked example in all parts. Laminated blade razor sharp after I've polished out surface rust, handle horn with bone spacers, very fine and pierced through carved, shows as well a stylized makara, note the lying bird in up!, scabbard wood from two glued parts, scabbard mouth horn.
60,5 cm inside scabbard, 58 cm without, blade 41,5 cm and 7 mm thick at the base.

Sajen · 10th May 2020, 01:58 PM

An example without scabbard, a piece which has seen extreme use, I would place it also at the first quarter of the 20th century, not sure about the blade but think it's laminated, very nice carved horn handle show makara. Bone inlayed eyes.
49,5 cm, blade 37 cm and 5 mm thick at base.

Sajen · 10th May 2020, 02:10 PM

An example wich I would place to the second quarter of the 20th century. The surprisingly very well worked blade seems laminated, handle horn, simple carved as parrot head, wooden scabbard halfs hold from horn mouth piece and foot, horn bands around and a belt loop also from horn.
50 cm inside scabbard, 46 cm without, blade 33,5 cm and 8,5 mm thick at base.

Sajen · 10th May 2020, 02:21 PM

An example either from second or third quarter of the 20th century, well worked but rough finished blade, unsure about the material, marked, note the spanish notch, handle from horn show a makara form, inlaid eyes, wooden scabbard halfs hold from several metal bands and foot, scabbard mouth from horn.
57 cm inside scabbard, 56,5 cm without, blade 42 cm and 6,5 mm thick at the base.

10th May 2020, 01:17 PM	#1
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,490	Sunda golok variations Hello dear members, I have assembled some Sunda golok in the last few years, in the past they don't have been from great interest for me. I have to state that this are very well worked blades and I doubt that only one of the shown examples are worked for those who travel. I will show them piece by piece with a short description. Attached Images

10th May 2020, 01:32 PM	#2
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,490	The possible oldest example in the collection, I would guess last quarter of the 19th century. Laminated blade, handle horn, carved as stylized makara, pierced through carved, low grade silver or mamas ferrule, scabbard two wooden slabs, two fine wooven rotan bands still present, scabbard mouth horn, foot (possible form from gobang scabbards) is missing. 58,5 cm inside scabbard, 55,8cm without, blade 42,5 cm, 9 mm thick at the base. Attached Images

10th May 2020, 01:47 PM	#3
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,490	Second example I would place to the first quarter of the 20th century, very well worked example in all parts. Laminated blade razor sharp after I've polished out surface rust, handle horn with bone spacers, very fine and pierced through carved, shows as well a stylized makara, note the lying bird in up!, scabbard wood from two glued parts, scabbard mouth horn. 60,5 cm inside scabbard, 58 cm without, blade 41,5 cm and 7 mm thick at the base. Attached Images

10th May 2020, 01:58 PM	#4
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,490	An example without scabbard, a piece which has seen extreme use, I would place it also at the first quarter of the 20th century, not sure about the blade but think it's laminated, very nice carved horn handle show makara. Bone inlayed eyes. 49,5 cm, blade 37 cm and 5 mm thick at base. Attached Images

10th May 2020, 02:10 PM	#5
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,490	An example wich I would place to the second quarter of the 20th century. The surprisingly very well worked blade seems laminated, handle horn, simple carved as parrot head, wooden scabbard halfs hold from horn mouth piece and foot, horn bands around and a belt loop also from horn. 50 cm inside scabbard, 46 cm without, blade 33,5 cm and 8,5 mm thick at base. Attached Images

10th May 2020, 02:21 PM	#6
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,490	An example either from second or third quarter of the 20th century, well worked but rough finished blade, unsure about the material, marked, note the spanish notch, handle from horn show a makara form, inlaid eyes, wooden scabbard halfs hold from several metal bands and foot, scabbard mouth from horn. 57 cm inside scabbard, 56,5 cm without, blade 42 cm and 6,5 mm thick at the base. Attached Images Last edited by Sajen; 10th May 2020 at 03:41 PM. Reason: add pictures