Hunting Knife Restoration Tips Sought

Berkley · 5th May 2015, 05:18 AM

Quote:

Originally Posted by Shakethetrees

You need a screwdriver that fits the brass pommel nut. !

Here's a commercial tang nut tool that fits Marble's and many German knives like yours with a tang nut in the pommel. It gives a good idea of what you need to make to remove the nut.

S.Workman · 6th May 2015, 02:06 AM

Quote:

Originally Posted by Berkley

Here's a commercial tang nut tool that fits Marble's and many German knives like yours with a tang nut in the pommel. It gives a good idea of what you need to make to remove the nut.

I did indeed make one but it's interesting to see that a multi width tool is or was available. I wish that they had put a hole in the center so you could run something through there and get more leverage/torque.
Does anyone know a professional or trade name for the fiber material that the spacers are made of? Jantz supply has fiberglass spacers, but I don't think it's fiberglass.

Rick · 6th May 2015, 02:32 AM

You have a PM .
Google is your friend (in this case) .

S.Workman · 6th May 2015, 03:54 AM

Quote:

Originally Posted by Rick

You have a PM .
Google is your friend (in this case) .

Nice, thank you.

kronckew · 6th May 2015, 08:03 AM

just to expand on AGM's fine info. lignum vitae is/was used in stern tube bearing & seals around the hull penetration of large low speed ship's propeller shafts. the seals used a trickle of water to lubricate and cool the wood bearing. lignum vitae essentially doesn't absorb water and is very hard and wear eresistant in this service. it also is denser than water (it sinks) and is not only expensive, but hard to find any more, the true LV is an endangered species, but small chunks for gun grips and knife handles can be found. wear a dust mask if you DIY (LV has medicinal uses when powdered). i used to see a lot of it around ship yards in sea ports as the wood was installed in dovetailed strips and needed replacement every decade or so. that source has dried up. modern seals are mechanical oil seals. great when they work, but a horror if they leak.

LV also makes nice clubs and walking sticks.

and it looks really cool polished up. also traditional for carver's mallets, marlin spikes, gavels, lawn bowls, wooden jars, etc.

A. G. Maisey · 7th May 2015, 11:59 PM

This is what lignum vitae looks like.

Rick · 8th May 2015, 01:21 AM

I have a good sized LV carver's mallet; you keep it waxed or it will check; it's a heavy bugger .

Good for deadeyes also IIRC .

6th May 2015, 08:03 AM	#5
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,152	just to expand on AGM's fine info. lignum vitae is/was used in stern tube bearing & seals around the hull penetration of large low speed ship's propeller shafts. the seals used a trickle of water to lubricate and cool the wood bearing. lignum vitae essentially doesn't absorb water and is very hard and wear eresistant in this service. it also is denser than water (it sinks) and is not only expensive, but hard to find any more, the true LV is an endangered species, but small chunks for gun grips and knife handles can be found. wear a dust mask if you DIY (LV has medicinal uses when powdered). i used to see a lot of it around ship yards in sea ports as the wood was installed in dovetailed strips and needed replacement every decade or so. that source has dried up. modern seals are mechanical oil seals. great when they work, but a horror if they leak. LV also makes nice clubs and walking sticks. and it looks really cool polished up. also traditional for carver's mallets, marlin spikes, gavels, lawn bowls, wooden jars, etc. Last edited by kronckew; 6th May 2015 at 08:16 AM.

7th May 2015, 11:59 PM	#6
A. G. Maisey Member Join Date: May 2006 Posts: 6,736	This is what lignum vitae looks like. Attached Images

6th May 2015, 02:32 AM	#3
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,268	You have a PM . Google is your friend (in this case) .

8th May 2015, 01:21 AM	#7
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,268	I have a good sized LV carver's mallet; you keep it waxed or it will check; it's a heavy bugger . Good for deadeyes also IIRC .