|
19th November 2023, 10:54 PM | #1 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,800
|
Well noted, the Solingen shops were masters at appeasing clientele and use of all manner of motif, marks, wording etc.
John Justus Runkel was a London based supplier who brought blades in from Solingen (I think from one family in particular, I think it was Neff) then applied his name to the blade spine, and sold them to cutlers. In rechecking Seifert (1962) in the plate I do see the similarity between the 'carps tongue' and 'pandour' points, and these clipped points seem somewhat in between. I recall seeing French blades with these kinds of point (blade tip). In the straight saber deemed a M1780 (not an official pattern) British which has a somewhat similar tip but more subdued. As the British used German blades so consistently, this one seemed Solingen though by this time the British were producing some blades. * example 'e' Seifert I have seen termed 'quill point'. the example with widened point (Persian) the feature is the 'yelman' which I was once told by a Polish fencing master/historian was referred to as 'the feather', but actually intended to add weight and momentum to the cut. Still curious on this rose design on hilts, any other examples? Last edited by Jim McDougall; 20th November 2023 at 12:02 AM. |
19th November 2023, 11:39 PM | #2 | |
Member
Join Date: Sep 2021
Location: New Zealand
Posts: 227
|
Quote:
Also, I suspect that Runkel imported his blades complete with his name and decoration on them. To engrave them himself would mean that he needed to reapply the blue and gilt again. Do you mean on the spine? I'll start up another thread. |
|
20th November 2023, 02:00 AM | #3 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,800
|
Excellent, a great topic and its own thread a great move.
|
|
|