|
1st April 2024, 11:38 PM | #1 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,047
|
Quote:
Finding a suitable hilt and uwer for the blade is, of course, a much easier proposition. I currently have two unsheathed Bali keris that i would love to fully dress one day. It is not an easy task outside of the culture. |
|
2nd April 2024, 12:03 AM | #2 |
Member
Join Date: May 2006
Posts: 6,738
|
I agree David.
But really, it is perspective:- if you cannot get the blade dressed easily, it is a simple decision to let it stay as is. |
2nd April 2024, 07:59 AM | #3 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 422
|
I have had one bad experience sending through a friend 2 blades to an address in Bali the blades got lost, but actually it was largely my friend's fault.
On the contrary I have had several successes in sending the measures (it is not easy but can be done) of the blade to a carver in Bali and they have made the dress for me , it needed minor alteration to fit and I am very happy with it. It surely can be done , but one has to want to do it. |
6th April 2024, 10:10 PM | #4 |
Member
Join Date: Mar 2005
Posts: 456
|
The Hilt is Loose
Hi All,
I got the hilt loose. The round tang hole was tapered to fit a keris tang, so the hilt appears to have been deliberately made for a keris. The hole is a hair less than 3” (7.62cm) deep . The kris tang measures 2-11/16” (6.82625cm) long and is 23/64” (9.118mm) in diameter at the base. When I took the hilt off, I found some écru colored thread wrapped around the end of the tang, so whoever mounted the hilt had some knowledge of how kris hilts are affixed. The oval shaped, brass selut is plain save for a rim at the top. There is also a brass ring below the selut that may have been soldered to it at one time but is now separate. The brass ring had the same orange pigment found in the blade fuller and some of that pigment was on the top of the ganja right around the ring. Why anyone, with enough knowledge to fit a keris hilt properly, would make such a bizarre hilt assemblage is anyone’s guess. The same question can be asked about the ultra deep wranka on the sheath. Sincerely, RobT |
|
|