Sudan arm dagger restore or not?

[Richard G]

I think they are all numerals 1983/3/16

Regards
Richard

[Kmaddock]

Hi
What's the plan as I cant see how the piece of ivory will be big enough for the job at hand
I found a hand fret saw is very good at cutting ivory with minimal wastage.
Regards
Ken

[RobT]

Richard G,

I can see where you are going. The symbol after the first "3" is merely a slash to separate the year from the month and likewise, the symbol after the second "3" is a slash that separates the month from the day. I will keep this in mind for the future.

Sincerely,
RobT

[Marc M.]

Originally Posted by Kmaddock

Hi
What's the plan as I cant see how the piece of ivory will be big enough for the job at hand
I found a hand fret saw is very good at cutting ivory with minimal wastage.
Regards
Ken

Hi Ken

I made a mould out of cardboard and am going to cut it out with a scroll saw for model making. the ivory bird is slightly thicker than the part to be repaired.
i will fill the cracks with ivory powder and glue and touch up.

Best regards
Marc

[Marc M.]

Originally Posted by Richard G

I think they are all numerals 1983/3/16

Regards
Richard

Hi Richard

Thanks for the translation of the date, it could of course mean anything.

Best regards
Marc

[Kmaddock]

Hi Marc,

I see where you are going with the repair and looks like you have enough material alright.

Will you put a pin in the handle to locate the part in situ while sanding down and give solidity to the join, also how are you going to blend the new "C" shaped part into the existing.

I never like cutting the original part but the shaping of new to old looks very jagged, are you tempted to make the jagged part more uniform by cutting out some of the broken part?

Take pictures as you go along if you have a chance.

Regards,

Ken

[Marc M.]

Originally Posted by Kmaddock

Hi Marc,

I see where you are going with the repair and looks like you have enough material alright.

Will you put a pin in the handle to locate the part in situ while sanding down and give solidity to the join, also how are you going to blend the new "C" shaped part into the existing.

I never like cutting the original part but the shaping of new to old looks very jagged, are you tempted to make the jagged part more uniform by cutting out some of the broken part?

Take pictures as you go along if you have a chance.

Regards,

Ken

Hi Ken

Good idea to use a pin, i hadn't thought of that because i'm going to use two component glue and it should be strong enough. Will not take anything off the original and try to make the new piece as fit as possible and fill the rest with glue and and ivory dust. Will take pictures during the process.

Best regards
Marc

[Kmaddock]

Hi

I find a pin useful in grafting parts not just for strength but it also center's the part in the same location each time when doing the shaping.

If using epoxy 2 part glue be aware it does go yellow when aged, for this reason I use wood glue for these jobs which sets clear and is easier to incorporate particulate matter to colour the filled in bits.

Wood glue is not as strong as epoxy but hopefully you wont be using the knife for its intended purpose and strength is not the main requirement.

best of luck

Ken

[Marc M.]

Two of my soudan armdaggers.

[Marc M.]

Post above is wrong thread.