to restore or not to restore...

[Sajen]

Originally Posted by JBG163

A real problem with amateur restoration, even cleaning the red rust with 250 or 400 or 600 grit can smoothen an edge (I mean, an edge of a fuller, the two edges of the back etc...) when it is normally sharp. I have seen a lot of «*cleaned*» things, finally harmed more than cleaned. I would say that the best to clean active rust is to use dear antler and oil. And let the black rust and pitting to professional

Yes, this I see similar! I've learned by my first job education to file a set square from a piece of iron so I know what I am doing and what I am not able to do I give to people who are able to do it, see here: http://www.vikingsword.com/vb/showth...t=visayan+kris I was sure that this blade was ruined by a real amateur restorer but a good friend was able to give the blade back it's original shape.
Another example is this Visayan knife which seems ruined by an amateur but Roland (our member Roland_M) gives it back the typical beveled edge.

Regards,
Detlef