The Cleaning of Blades

Rick · 19th May 2018, 03:32 PM

When I'm finally finished with the rust treatment I'll post the blade before I try an etch with super strong coffee. Right now the blade is in a heavy coating of De-corroder wrapped in plastic wrap to keep it from drying out too quickly.

Something occurred to me about the subject under discussion: there are many variations in quality of steel and pamor material; would this difference not interfere with a consistent result in whatever rust treatment is involved?

/5/20

Well, here are pictures of this blade after treatment with Metal De-corroder (a Renaissance product) a hot rinse and before any etching has been attempted.

It was quite crusty and the color difference was not aparrent; no before pics, sorry.

19th May 2018, 03:32 PM	#13
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,385	When I'm finally finished with the rust treatment I'll post the blade before I try an etch with super strong coffee. Right now the blade is in a heavy coating of De-corroder wrapped in plastic wrap to keep it from drying out too quickly. Something occurred to me about the subject under discussion: there are many variations in quality of steel and pamor material; would this difference not interfere with a consistent result in whatever rust treatment is involved? /5/20 Well, here are pictures of this blade after treatment with Metal De-corroder (a Renaissance product) a hot rinse and before any etching has been attempted. It was quite crusty and the color difference was not aparrent; no before pics, sorry. Attached Images Last edited by Rick; 20th May 2018 at 05:37 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode