questions about Taiwanese matchlocks

rickystl · 4th September 2016, 04:22 PM

Well, apparently, there is a sizable difference between the Taiwanese and Vietnamese guns other than the rudimantry first glance. So, you can ignore most of my post mentions above. LOL

So, what we want to do is replicate a Taiwanese matchlock. And I assume with as much accuracy as reasonable (?) Since I don't recall ever seeing a picture of one, I can't really comment on the specifics. But Philip has done an outstanding job. If there is an original available to copy from photos and specs, it is doable. Here's what I visualize so far:

BARREL: Smoothbore barrels in virtually any length, caliber, and dimension can be made. And at a reasonable cost. So I don't see this being much of an issue.
STOCK: I'm thinking the stock could be made as one-piece. There are gunstock blanks 2" thick readilly available (although I don't know what wood was typically used with these Taiwanese matchlocks). But you would need a wood plank that is about 12" WIDE (guessing) by 2" thick, in the desired length. That might be difficult to find (?). Would be worth waiting to see what Philip's friend tells us.
LOCK: The MATCHLOCK lock seems to be the only lock to replicate authenticity. But if you CAN'T use a matchlock lock, not sure what the alternative should be? While the Vietnamese style flintlock would be historically incorrect, any contemorary made flintlock would be even more so, and look very odd on the gun. Possibly a percussion variation similar to another Thread recently posted here on the Forum?

Is there actually a law in Taiwan using a matchlock? Just curious.

Rick

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

4th September 2016, 04:22 PM	#8
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,632	Well, apparently, there is a sizable difference between the Taiwanese and Vietnamese guns other than the rudimantry first glance. So, you can ignore most of my post mentions above. LOL So, what we want to do is replicate a Taiwanese matchlock. And I assume with as much accuracy as reasonable (?) Since I don't recall ever seeing a picture of one, I can't really comment on the specifics. But Philip has done an outstanding job. If there is an original available to copy from photos and specs, it is doable. Here's what I visualize so far: BARREL: Smoothbore barrels in virtually any length, caliber, and dimension can be made. And at a reasonable cost. So I don't see this being much of an issue. STOCK: I'm thinking the stock could be made as one-piece. There are gunstock blanks 2" thick readilly available (although I don't know what wood was typically used with these Taiwanese matchlocks). But you would need a wood plank that is about 12" WIDE (guessing) by 2" thick, in the desired length. That might be difficult to find (?). Would be worth waiting to see what Philip's friend tells us. LOCK: The MATCHLOCK lock seems to be the only lock to replicate authenticity. But if you CAN'T use a matchlock lock, not sure what the alternative should be? While the Vietnamese style flintlock would be historically incorrect, any contemorary made flintlock would be even more so, and look very odd on the gun. Possibly a percussion variation similar to another Thread recently posted here on the Forum? Is there actually a law in Taiwan using a matchlock? Just curious. Rick