Ivory Kris repair

Nirghosa · 8th July 2016, 02:59 PM

I recently purchased this Ivory Kris and due to poor packaging from the seller, the handle was broken.
I'm planning to have it repaired but thought while I'm at it maybe I could have the other end replaced with more Ivory. Have found a pic on another thread of what it likely looked like but that might be a bit expensive to have carved. can anybody supply a representative picture of what a more diminutive repair might look like?

Rich · 8th July 2016, 03:18 PM

If you have the broken piece(s), can you super glue them back together? A small drop of glue possibly won't even be seen. Just a thougth.
Rich

Nirghosa · 8th July 2016, 03:20 PM

Quote:

Originally Posted by Rich

If you have the broken piece(s), can you super glue them back together? A small drop of glue possibly won't even be seen. Just a thougth.
Rich

I have considered that. I'd really rather do it right for longevity if the price isn't too bad.

Tim Simmons · 8th July 2016, 04:34 PM

I think Rich is right. I might add that things got repaired in there original environment. If the break matches exactly then careful super glue is a good solution. If you are worried about evidence of repair then I would suggest that before the super glue is completely dry you could rub powdered charcoal into the join. Honest repair, then it is just another black crack in the handle and will be no more offensive to the eye than all the other all old black cracks.

Battara · 8th July 2016, 04:37 PM

Suerte, bro!

It just sickens me that these were broken off on such a nice example!

kino · 8th July 2016, 04:47 PM

Quote:

Originally Posted by Nirghosa

I'd really rather do it right for longevity if the price isn't too bad.

Ouch!
I agree, I would seek out antique restores or people that does ivory carvings or scrimshaws in your area, maybe they can help. Strike that, I meant bone carvings.
If you go the CyA glue route, make sure you have steady hands.

Nirghosa · 8th July 2016, 04:59 PM

yes, I have a contact for ivory repair that another member has used successfully. I wanted to send him some good pics and then get an idea what he thinks.
and with Ivory no, I don't trust my hands

and yes, I was very sick over the damage when I received it

Sajen · 8th July 2016, 08:42 PM

Would not use superglue. Would use a two-component adhesive. Just my thoughts!

Regards,
Detlef

8th July 2016, 02:59 PM	#1
Nirghosa Member Join Date: Apr 2010 Location: Michigan Posts: 119	Ivory Kris repair I recently purchased this Ivory Kris and due to poor packaging from the seller, the handle was broken. I'm planning to have it repaired but thought while I'm at it maybe I could have the other end replaced with more Ivory. Have found a pic on another thread of what it likely looked like but that might be a bit expensive to have carved. can anybody supply a representative picture of what a more diminutive repair might look like? Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

8th July 2016, 03:18 PM	#2
Rich Member Join Date: Dec 2004 Location: comfortably at home, USA Posts: 432	If you have the broken piece(s), can you super glue them back together? A small drop of glue possibly won't even be seen. Just a thougth. Rich

8th July 2016, 04:34 PM	#4
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,925	I think Rich is right. I might add that things got repaired in there original environment. If the break matches exactly then careful super glue is a good solution. If you are worried about evidence of repair then I would suggest that before the super glue is completely dry you could rub powdered charcoal into the join. Honest repair, then it is just another black crack in the handle and will be no more offensive to the eye than all the other all old black cracks.

8th July 2016, 04:37 PM	#5
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,345	Suerte, bro! It just sickens me that these were broken off on such a nice example!

8th July 2016, 04:59 PM	#7
Nirghosa Member Join Date: Apr 2010 Location: Michigan Posts: 119	yes, I have a contact for ivory repair that another member has used successfully. I wanted to send him some good pics and then get an idea what he thinks. and with Ivory no, I don't trust my hands and yes, I was very sick over the damage when I received it

8th July 2016, 08:42 PM	#8
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,416	Would not use superglue. Would use a two-component adhesive. Just my thoughts! Regards, Detlef