What is this sword?

Ahriman · 17th September 2005, 05:13 PM

If it'd be older, I'd say a refurnitured Oakeshott XI, or a XIII . Unfortunatuly, they'd be 12-14th century... so it's out, but the blade design, the lenght (the Albions' blade is longer only with 3"), and the mentioned cutting ability is all too familiar. BTW, I love cutting sword like these. So I don't know... is it possible that it remained in fashion for so long?

Ian · 17th September 2005, 06:05 PM

This is almost certainly a Moro copy of a European broadsword. I have a provenanced example, complete with wooden scabbard, that was commissioned in Lanao del Sur in the early 20th C by a US Administrator.

The Moro origin is probably correct. Nice sword.

Ian.

Ahriman · 17th September 2005, 06:46 PM

What do you mean by broadsword? The middle-age, or the early modern-age one? Just for clearing things up in my mind.

Ahriman · 17th September 2005, 06:48 PM

I forgot to add this to my earlier post AND the newer one as well. Moro origin is correct as far as I know, but I'm faaaaar from being an expert.

fearn · 17th September 2005, 06:50 PM

Hi Ian et al.,

Just to start an argument, why couldn't this be a philippine copy of a Chinese Jian? Why does it have to be a copy of anything European?

F

Ahriman · 17th September 2005, 06:55 PM

Even as I'm not Ian... I think that Jians are made with a bit narrower and more paralell blades. I might be wrong.
But the blade looks very much like the ones I posted.

Hm, before I forget: I don't know much of chinese swords, so it was only a guess.

Ian · 17th September 2005, 08:23 PM

Ahriman:

"Huge and heavy" would seem to exclude a jian, which seems to me a relatively light and fast version of the straight-bladed sword. The martial techniques that I have seen demonstrated with the jian emphasized skill and technique rather than brute force, not that skill and technique is irrelevant to heavy weapons also.

I was referring to a medieval broadsword above.

Ian.

Edit: Pictures of my Moro sword below (Commissioned in 1930)

The blade is well forged and the fuller is very even for hand forged work. Note the precision of the fuller and bevels of the edges towards the tip of the blade (second picture). The handle is a dark hardwood (ebony) trimmed with brass. A very solid and well made piece. The blade resembles an Oakeshott Type X (11th C).
OAL = 36.25 inches (92 cm)
Blade = 27 inches (68 cm)
Handle = 9.25 inches (24 cm)

17th September 2005, 08:23 PM	#7
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,522	Ahriman: "Huge and heavy" would seem to exclude a jian, which seems to me a relatively light and fast version of the straight-bladed sword. The martial techniques that I have seen demonstrated with the jian emphasized skill and technique rather than brute force, not that skill and technique is irrelevant to heavy weapons also. I was referring to a medieval broadsword above. Ian. Edit: Pictures of my Moro sword below (Commissioned in 1930) The blade is well forged and the fuller is very even for hand forged work. Note the precision of the fuller and bevels of the edges towards the tip of the blade (second picture). The handle is a dark hardwood (ebony) trimmed with brass. A very solid and well made piece. The blade resembles an Oakeshott Type X (11th C). OAL = 36.25 inches (92 cm) Blade = 27 inches (68 cm) Handle = 9.25 inches (24 cm) Attached Images Last edited by Ian; 17th September 2005 at 09:44 PM. Reason: Pictures attached of Moro Broadsword

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

17th September 2005, 05:13 PM	#1
Ahriman Member Join Date: Sep 2005 Location: Hungary Posts: 72	If it'd be older, I'd say a refurnitured Oakeshott XI, or a XIII . Unfortunatuly, they'd be 12-14th century... so it's out, but the blade design, the lenght (the Albions' blade is longer only with 3"), and the mentioned cutting ability is all too familiar. BTW, I love cutting sword like these. So I don't know... is it possible that it remained in fashion for so long?

17th September 2005, 06:05 PM	#2
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,522	This is almost certainly a Moro copy of a European broadsword. I have a provenanced example, complete with wooden scabbard, that was commissioned in Lanao del Sur in the early 20th C by a US Administrator. The Moro origin is probably correct. Nice sword. Ian.

17th September 2005, 06:46 PM	#3
Ahriman Member Join Date: Sep 2005 Location: Hungary Posts: 72	What do you mean by broadsword? The middle-age, or the early modern-age one? Just for clearing things up in my mind.

17th September 2005, 06:48 PM	#4
Ahriman Member Join Date: Sep 2005 Location: Hungary Posts: 72	I forgot to add this to my earlier post AND the newer one as well. Moro origin is correct as far as I know, but I'm faaaaar from being an expert.

17th September 2005, 06:50 PM	#5
fearn Member Join Date: Dec 2004 Posts: 1,247	Hi Ian et al., Just to start an argument, why couldn't this be a philippine copy of a Chinese Jian? Why does it have to be a copy of anything European? F

17th September 2005, 06:55 PM	#6
Ahriman Member Join Date: Sep 2005 Location: Hungary Posts: 72	Even as I'm not Ian... I think that Jians are made with a bit narrower and more paralell blades. I might be wrong. But the blade looks very much like the ones I posted. Hm, before I forget: I don't know much of chinese swords, so it was only a guess.