Celebes keris?

danny1976 · 12th January 2012, 11:37 PM

Hi Ben,

About the straiten the peksi , If it was mine I would put it in a bankschroef .
if you do that easy it will do no harm.

regards,

danny

Harley · 13th January 2012, 12:13 AM

Thanks Danny,

I think that is the safest way to do it.

regards,
Ben

Maurice · 13th January 2012, 01:28 AM

Quote:

Originally Posted by danny1976

If it was mine I would put it in a bankschroef .

Danny, I think it's called a benchscrew...

A. G. Maisey · 13th January 2012, 02:07 AM

I normally just put a bit heat into the tang with a gas torch and hammer the tang flat. No need to get it red hot, just warm it up a bit. It only takes a few light taps to straighten.

Sometimes with tang that's not too thick you can just straighten it cold with your fingers.

PenangsangII · 13th January 2012, 03:09 AM

the pamor garap looks like senopaten era garap (or even Majapahit). But the material looks from newer era. I am puzzled too

and ofcourse people of Nusantara move about from island to island even after WWII. Restrictions only took place around 1950s.

Harley · 13th January 2012, 11:55 AM

Thanks Alan, I think it's a good idea to give it a little heat, i would reckon that it makes the change of breaking less.

Thanks PenangsangII for your answer, is there anything that i could do to give you a better view, better pictures or clean the blade?

regards,
Ben

Sajen · 13th January 2012, 06:39 PM

Hi Ben,

when the fit is good in this sheath I would let the keris with this sheath. Only the pendokok seems to be a little bit to small in diameter.

Regards,

Detlef

Rick · 13th January 2012, 07:33 PM

Just thinking out loud; perhaps straightening the pesi is not a good idea if one wishes to use the same handle .

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12th January 2012, 11:37 PM	#1
danny1976 Member Join Date: Jan 2009 Location: Holland Posts: 245	Hi Ben, About the straiten the peksi , If it was mine I would put it in a bankschroef . if you do that easy it will do no harm. regards, danny

13th January 2012, 12:13 AM	#2
Harley Member Join Date: Sep 2011 Location: Nederland Posts: 83	Thanks Danny, I think that is the safest way to do it. regards, Ben

13th January 2012, 02:07 AM	#4
A. G. Maisey Member Join Date: May 2006 Posts: 7,085	I normally just put a bit heat into the tang with a gas torch and hammer the tang flat. No need to get it red hot, just warm it up a bit. It only takes a few light taps to straighten. Sometimes with tang that's not too thick you can just straighten it cold with your fingers.

13th January 2012, 03:09 AM	#5
PenangsangII Member Join Date: Jun 2007 Posts: 401	the pamor garap looks like senopaten era garap (or even Majapahit). But the material looks from newer era. I am puzzled too and ofcourse people of Nusantara move about from island to island even after WWII. Restrictions only took place around 1950s.

13th January 2012, 11:55 AM	#6
Harley Member Join Date: Sep 2011 Location: Nederland Posts: 83	Thanks Alan, I think it's a good idea to give it a little heat, i would reckon that it makes the change of breaking less. Thanks PenangsangII for your answer, is there anything that i could do to give you a better view, better pictures or clean the blade? regards, Ben

13th January 2012, 06:39 PM	#7
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 9,422	Hi Ben, when the fit is good in this sheath I would let the keris with this sheath. Only the pendokok seems to be a little bit to small in diameter. Regards, Detlef

13th January 2012, 07:33 PM	#8
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,376	Just thinking out loud; perhaps straightening the pesi is not a good idea if one wishes to use the same handle .