Metal De-Corroder and its effects

RSWORD · 17th September 2010, 02:09 PM

An important step in all of this process to definitely not forget is to add plenty of oil after any form of etching, polishing or anything of the sort. I recommend WD-40 as the first coat after a good polish or etch as it does a great job of expelling water molecules from the steel and really sinks into the pores of the metal. After a day or two of a good WD-40 soak, wipe away, clean area with acetone and then apply a light coat of gun oil to the area to conserve for longer periods of time.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

17th September 2010, 02:09 PM	#11
RSWORD Member Join Date: Dec 2004 Location: Greensboro, NC Posts: 1,093	An important step in all of this process to definitely not forget is to add plenty of oil after any form of etching, polishing or anything of the sort. I recommend WD-40 as the first coat after a good polish or etch as it does a great job of expelling water molecules from the steel and really sinks into the pores of the metal. After a day or two of a good WD-40 soak, wipe away, clean area with acetone and then apply a light coat of gun oil to the area to conserve for longer periods of time.