Keeping on the cannon path

[celtan]

Thank you, Bluelake. Probably the quality and purity of the ingredientss (sources) in the 16th C would not have been the highest. So, we are left with BP that was effectively less powerful than what was available in the 18th C.
Best

Manuel

Originally Posted by bluelake

I think a lot of it would relate to your point #3. One big problem was having the niter separate; without it, you just have a smoky, smoldering mess, as it is the oxidizer for the bp. However, even when the separation was accounted for, a finely ground powder can still leave a lot to be desired.

I've made bp and tested it alongside modern commercial types, using a standard ratio mix (75:15:10), along with some other ratios. I also used a binder (rice rinse water), which kept things from separating. However, instead of corning, I did a fine grind, which would have been similar to bp here in Korea back in the 14th C. I used a flintlock eprouvette and compared my powder to commercial powders (FFG-FFFFG) and the results were quite lopsided; my powder would register 1~2 on the scale, while the commercial was 3~5. I think that not only was separation a big problem, but also the ratio of niter/charcoal/sulfur. Still, I wouldn't want to be on the receiving end of either type