Opinions on a Takouba

katana · 3rd June 2006, 08:52 PM

Sheet metals, especially those of the softer metals like copper are notorious for breaking when straightening a piece that is creased, (such as the disc fitted behind the guard.) If you do attempt this, my advice would be slowly and gently, perhaps using pliers to grip and lever the piece, this will give you more control. Ensure that the jaws of the pliers are protected by thickish cardboard (not corrugated), this will help prevent marking the softer metal of the 'disc.' It won't be a perfect repair, but will give a more acceptable appearance..... Hope this helps

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

3rd June 2006, 08:52 PM	#14
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,658	Sheet metals, especially those of the softer metals like copper are notorious for breaking when straightening a piece that is creased, (such as the disc fitted behind the guard.) If you do attempt this, my advice would be slowly and gently, perhaps using pliers to grip and lever the piece, this will give you more control. Ensure that the jaws of the pliers are protected by thickish cardboard (not corrugated), this will help prevent marking the softer metal of the 'disc.' It won't be a perfect repair, but will give a more acceptable appearance..... Hope this helps