Identifying My Acquisitions

[MichaelZWilliamson]

Originally Posted by A. G. Maisey

G'day Michael.

I believe the embossed pendok (sleeve) is brass, or possibly mamas.

I believe the hanger has been attached with ordinary soft solder.

I would heat the hanger with a soldering iron and lift the hanger off as it softened. There will be a residue of solder left, maybe heat with a torch and brush it off, pick off the little bits. Shouldn't be too difficult.

If I can desolder it, removing the residue will be easy. I'll try that this week.

Thanks.