New Rencong Meucannge comments and advice

Rick · 23rd May 2013, 04:24 AM

Possibly one might apply a very tiny drop of say, acrylic artist's paint or some substance that will leave a mark to the center of one part .
Then carefully and very lightly press the parts together in the proper aligned position .
Pull them apart and you will have, at least a rough idea from the residue of where to drill on each part .

Yeah, there was a previously repaired/restored break in that spot .

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

23rd May 2013, 04:24 AM	#6
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,376	Possibly one might apply a very tiny drop of say, acrylic artist's paint or some substance that will leave a mark to the center of one part . Then carefully and very lightly press the parts together in the proper aligned position . Pull them apart and you will have, at least a rough idea from the residue of where to drill on each part . Yeah, there was a previously repaired/restored break in that spot .