Tulwar of the 4th Punjab Infantry with shortened blade.

Chris Tubman · 10th October 2025, 07:28 PM

Here’s a Tulwar that I recently acquired which may be of interest.
It has a shortened blade of about 20" length which appears to be very similar to a Prussian M1811 “Blücher” sabre that I also own or possibly a British 1796 Light Cavalry sabre?
When put together the curve of the blades matches exactly and the fullers are identical.
There are no makers marks on the blade but it shows a very short ricasso near the spine.
The blade tapers from about 10mm at the hilt to around 2mm at the point which has been ground to a hatchet form.
The hilt although very pitted still shows silver inlay in a six petal flowers and foliage design.
There’s a lot of open space around the short tang but what could be lead (?) holding the blade into the quillon block.
The quillon are stamped with the number 4 and P.I which would suggest the sword was used by the 4th Punjab Infantry who were formed in Lahore in 1849.
Any further thoughts in this sword are most welcome.

Ian · Yesterday, 11:49 PM

Hi Chris, makes me wonder why such a nice old hilt ended up on a cut down and reshaped blade. Perhaps they started out together when the blade was intact and the blade got broken. Or maybe it's a later ensemble. Some of the silver work is raised above the background iron on the hilt. That looks recent to me and not in a traditional form.

10th October 2025, 07:28 PM	#1
Chris Tubman Member Join Date: Oct 2025 Posts: 4	Tulwar of the 4th Punjab Infantry with shortened blade. Here’s a Tulwar that I recently acquired which may be of interest. It has a shortened blade of about 20" length which appears to be very similar to a Prussian M1811 “Blücher” sabre that I also own or possibly a British 1796 Light Cavalry sabre? When put together the curve of the blades matches exactly and the fullers are identical. There are no makers marks on the blade but it shows a very short ricasso near the spine. The blade tapers from about 10mm at the hilt to around 2mm at the point which has been ground to a hatchet form. The hilt although very pitted still shows silver inlay in a six petal flowers and foliage design. There’s a lot of open space around the short tang but what could be lead (?) holding the blade into the quillon block. The quillon are stamped with the number 4 and P.I which would suggest the sword was used by the 4th Punjab Infantry who were formed in Lahore in 1849. Any further thoughts in this sword are most welcome. Attached Images Last edited by Chris Tubman; 11th October 2025 at 09:39 AM. Reason: Add an image.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Yesterday, 11:49 PM	#2
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,497	Hi Chris, makes me wonder why such a nice old hilt ended up on a cut down and reshaped blade. Perhaps they started out together when the blade was intact and the blade got broken. Or maybe it's a later ensemble. Some of the silver work is raised above the background iron on the hilt. That looks recent to me and not in a traditional form.