Pamor ron kenduru/genduru?

oariff · 29th April 2024, 09:10 PM

Hi All,

I have been reading a few articles in the forum and I am guessing that this might be a Madura keris with Pamor ron kenduru/genduru.

Am I even close?
Regards.

kai · 30th April 2024, 12:18 AM

Welcome to the forum, Omar!

Madura sounds like a good starting point to me for both scabbard and blade...

Regards,
Kai

A. G. Maisey · 30th April 2024, 02:56 AM

Yes, Madura or possibly somewhere else in East Jawa, like maybe Malang or between Malang & Surabaya.

That's the blade, the wrongko could come from a number of places, but all probably within East Jawa, the pendok is Madura.

In East Jawa we would call this pamor Bulu Ayam --- chicken feathers, the blade is recent, probably after about the mid-1980's.

Hilt is broadly Solo planar style.

David · 30th April 2024, 09:47 PM

I second what Alan stated, but will add that it is a very attractive and nicely made example IMO. I'd love to see it cleaned up a bit.

oariff · 10th May 2024, 06:59 AM

Hi,

Will this be another Madura keris with a Ron Pamor too?

Cheers.

David · 10th May 2024, 08:31 PM

Yes Omar, this would be another Keris Madura with a similar pamor. The difference would be that this would be an older example, probably dating back to the 19th century. This example also has a lovely ivory donoriko hilt in very nice condition and an old Madura style mendhak. I would suggest hitting that mendhak with a polishing cloth as i believe you may find that it is tarnished silver and it should should polish up nicely. The wrongko is also a lovely carving. Over all, a very nice keris.
In general i might suggest that you begin to make separate threads for each new keris you present, though in this case the obvious similarities might make a single thread make sense.

29th April 2024, 09:10 PM	#1
oariff Member Join Date: Apr 2024 Posts: 52	Pamor ron kenduru/genduru? Hi All, I have been reading a few articles in the forum and I am guessing that this might be a Madura keris with Pamor ron kenduru/genduru. Am I even close? Regards. Attached Images

10th May 2024, 06:59 AM	#5
oariff Member Join Date: Apr 2024 Posts: 52	Hi, Will this be another Madura keris with a Ron Pamor too? Cheers. Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

30th April 2024, 12:18 AM	#2
kai Member Join Date: Apr 2005 Posts: 3,255	Welcome to the forum, Omar! Madura sounds like a good starting point to me for both scabbard and blade... Regards, Kai

30th April 2024, 02:56 AM	#3
A. G. Maisey Member Join Date: May 2006 Posts: 7,085	Yes, Madura or possibly somewhere else in East Jawa, like maybe Malang or between Malang & Surabaya. That's the blade, the wrongko could come from a number of places, but all probably within East Jawa, the pendok is Madura. In East Jawa we would call this pamor Bulu Ayam --- chicken feathers, the blade is recent, probably after about the mid-1980's. Hilt is broadly Solo planar style.

30th April 2024, 09:47 PM	#4
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,250	I second what Alan stated, but will add that it is a very attractive and nicely made example IMO. I'd love to see it cleaned up a bit.

10th May 2024, 08:31 PM	#6
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,250	Yes Omar, this would be another Keris Madura with a similar pamor. The difference would be that this would be an older example, probably dating back to the 19th century. This example also has a lovely ivory donoriko hilt in very nice condition and an old Madura style mendhak. I would suggest hitting that mendhak with a polishing cloth as i believe you may find that it is tarnished silver and it should should polish up nicely. The wrongko is also a lovely carving. Over all, a very nice keris. In general i might suggest that you begin to make separate threads for each new keris you present, though in this case the obvious similarities might make a single thread make sense.