View Single Post
Old 25th November 2020, 05:56 AM   #11
thomas hauschild
Member
 
Join Date: May 2017
Location: Germany
Posts: 139
Default

The area near the cup seems to be made from a different piece of steel. Maybe reinforced later after the blade was broken near the hilt. I have some blades with reinforced areas like this to get more thickness in that critical area. If a blade will have a constant thickness the area with reduced material to fit the hilt will be most critical to brake. The logical solution will be ..to make it thicker in that area and to prefer a softer piece of steel outside ( like in a 3-layer / sanmai blade) for the repair. If a blade was broken in the past the steel was still an expensive piece of material. So why do not repair it ?. The blade seems to be made out of a raffinated steel, just to refine the steel , not with the intention to create a special pattern. The use of a raffinated, different piece for the reinforcement seems to be done in the past „to that time“.

Just my opinion about the blade, without knowledge about type of sword.

Best Thomas
thomas hauschild is offline   Reply With Quote