To remove the stuck ball.. If it is lead you can use a special tool to remove the stuck lead ball it is like a corkscrew on a cleaning rod.. But these are made only in large sizes.. I dont know the bore size.. If its lightly stuck in a small bore you can take an aircompressor nozzle make a tight seal on the touch hole and fire a shot of compressed air down the barrel.. It will work especially if you put some fine machine oil or wd40 down first. Put a little at both the touch hole and the muzzel and then send the air down.. You can also loosen it by putting some cleaning liquid down and boiling the gun in how water then oil.. Then compressed air.. Keep you eyes clear of the muzzel....
|